The racer asked
can a 48t pinion fit without hitting the top deck
Miles, So Dialed's RC setup AI
I can't confirm from the data I have whether a 48T pinion clears the top deck on the RS2.0, so I can't give you a yes or no on that.
Going from the kit 30T to a 48T is a large jump. A bigger pinion gives taller gearing, which lowers the final drive ratio. That means more top speed, less acceleration, and more motor and ESC heat. The pinion's size also depends on its pitch, and the kit setup lists gear pitch as 64 while the included pinion is a 48 pitch 30T. Before you test-fit it, confirm your pitch and spur match the pinion.
- Check the pitch first: the pinion and spur must be the same pitch, and the kit setup runs a 86T spur.
- Test-fit with the motor plate in its tightest mesh position, then rotate the drivetrain by hand and watch for contact with the top deck or the bulkhead.
- If it hits, the usual fixes are moving the motor plate back to open the mesh (which can also free the pinion from the deck) or stepping down a tooth.
If you tell me your motor (turns or Kv), spur, and gear pitch, I can check what final drive a 48T gives and suggest a more realistic pinion for your setup.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RS2.0 questions
What springs for Yokomo RS2.0 on high-grip CRC black carpet?
For a Yokomo RS2.0 on high-grip CRC black carpet, start with the stock #YS-RSS springs front and rear. I don’t have a confirmed RS2.0 spring-rate comparison or a specific...
Is a 13T motor good for a Yokomo RS2.0?
If you mean a 13.5T brushless motor, yes, it can be a good choice for a Yokomo RS2.0 in club-level stock touring car racing. Whether it’s legal or competitive depends on your...
Yokomo RS2.0 asphalt setup with 21.5T motor?
Assuming a 21.5T Yokomo RS2.0 on medium-grip asphalt, start with about 5 mm front and 5.5 mm rear ride height, -1.5° front toe, and +3.5° rear toe. The 21.5T motor does not...
What are good droop base settings for carpet on a Yokomo RS2.0?
There isn’t a carpet-specific RS2.0 droop number available here, so I wouldn’t call any value a confirmed carpet baseline. For a consistent first measurement, use the RS2.0’s...
What's a good base setup for a Yokomo RS2.0 on high-grip indoor carpet?
There isn’t a high-grip-specific RS2.0 setup available, but this is a solid starting point based on RS2.0 carpet settings and a general touring-car carpet baseline: Ride height: 5...
