Parts list

Arrma Infraction and Felony Option Parts

Aluminum, steel and titanium option parts that fit both the Arrma Infraction and the Arrma Felony, grouped by the part that breaks, with prices and fitment checked against the retailer listing.

Every part on this page is an option or upgrade part for the Arrma Infraction and Arrma Felony, not a stock replacement. Each one has been checked against the fitment list on the retailer’s own product page and fits both cars. They are grouped by the thing that breaks. Prices were current when this page was built and will drift.

The Infraction and Felony share a chassis with the Arrma Limitless, so most of these fit that car as well. Stock spare parts for both cars are linked from the model pages.

Steering

The steering assembly is the first thing to break on a 1/7 car. A curb strike loads the rack, the plates and the servo horn before it ever reaches the arms.

PartBrandPriceWhy you buy it
Arrma EXB Aluminum Steering Rack (Red) (opens in new tab)Arrma$22.99The main upgrade. The stock rack flexes under a hard curb hit and never comes back straight
Treal Hobby Arrma 6S BLX 7075 Aluminum Front Steering Knuckle Set (opens in new tab)Treal Hobby$42.98Replaces the composite knuckles that snap in a front-corner impact
Arrma Aluminum "A" Steering Plate (Red) (2) (opens in new tab)Arrma$6.99Cheap, and the plate it replaces bends before anything else does
Arrma Aluminum "B" Steering Plate (Red) (2) (opens in new tab)Arrma$11.99The other half of the same job
Arrma Aluminum Servo Horn (Black) (opens in new tab)Arrma$18.99A stripped plastic horn is the quiet cause of vague steering. Check yours before buying a servo
Arrma 6S BLX Aluminum Servo Saver Hub Set (Black) (opens in new tab)Arrma$7.99Metal hub for the servo saver, so the saver still does its job after a few hits
Arrma 3x45mm Steel Steering Post (2) (opens in new tab)Arrma$8.99Steel posts for the rack. Inexpensive and they stop flex at the pivot

Hubs and axle carriers

Rear hubs take the load in every landing. These are the parts owners replace second, after steering.

PartBrandPriceWhy you buy it
ST Racing Concepts Arrma 6S BLX Aluminum Rear Hub Carriers (Gun Metal) (2) (opens in new tab)ST Racing Concepts$25.99The common rear hub swap, and the cheapest metal option that fits
Treal Hobby Arrma 6S BLX 7075 Aluminum Rear Hub Set (Black) (2) (opens in new tab)Treal Hobby$42.98Heavier duty than the ST Racing set, bearings included
Hot Racing Arrma Aluminum "HD Bearings" Axle Carriers (Black) (Legacy) (opens in new tab)Hot Racing$49.88Front carriers with the larger bearings, which is the actual failure point
Hot Racing Arrma 6S Aluminum Rear Hubs w/Heavy Duty Bearings (Black) (2) (opens in new tab)Hot Racing$49.88Rear equivalent of the same fix

Driveline

Titanium hybrid driveshafts are the option-parts category that barely exists anywhere else for this platform. Method RC lists these specifically for the Arrma 1/7 on-road cars.

PartBrandPriceWhy you buy it
Method RC Titanium 124mm Front/Rear Hybrid CVD (2) (Arrma 1/7 On-Road) (opens in new tab)Method RC$64.99The full front or rear CVD pair. The most expensive item here and the one that ends driveshaft failures
Method RC Titanium 94mm Front/Rear CVD Axle Shaft (2) (Arrma 1/7 On-Road) (opens in new tab)Method RC$36.99Axle shafts only, if your cups are still good
Method RC Titanium Front/Rear CVD Stub Axle (2) (Arrma 1/7 On-Road) (opens in new tab)Method RC$23.99Stub axles, the cheaper half of the same repair
Method RC Titanium 168mm Center-Rear Hybrid Driveshaft (Arrma 1/7 On-Road) (opens in new tab)Method RC$21.99Center rear shaft
Method RC Titanium 102mm Center-Front Hybrid Driveshaft (Arrma 1/7 On-Road) (opens in new tab)Method RC$15.99Center front shaft
Arrma Steel Differential Outdrive (2) (opens in new tab)Arrma$12.99Steel outdrives, which round off long before the diff itself wears
Hot Racing Arrma 6S 7x18mm Steel Input Shaft Cup (opens in new tab)Hot Racing$8.88Input cup for the gearbox, a cheap part that fails under 6S power

Shock towers and shocks

Both cars run big shocks and a lot of unsprung weight. The towers crack at the mounting holes.

PartBrandPriceWhy you buy it
Arrma Infraction/Limitless Aluminum Rear Shock Tower (opens in new tab)Arrma$22.99Direct fit rear tower from Arrma, no cross-referencing needed
Hot Racing Arrma Limitless/Infraction Aluminum Front Shock Tower (Black) (opens in new tab)Hot Racing$19.88Front tower, Hot Racing
Arrma 16x36mm Aluminum Infraction/Limitless Front Shock Body (2) (opens in new tab)Arrma$28.99Aluminum shock bodies front. A dented body is a leaking shock
Arrma 16x41mm Aluminum Infraction/Limitless Rear Shock Body (2) (opens in new tab)Arrma$28.99Rear pair of the same
Hot Racing Arrma Limitless Aluminum Bleeder Shock Caps (2) (opens in new tab)Hot Racing$16.88Bleeder caps make rebuilds far less annoying
Hot Racing Arrma 6S Locking Aluminum Shock End (Black) (opens in new tab)Hot Racing$16.88Locking shock ends stop the rod ends popping off on a big landing

Chassis and braces

These are stiffness parts more than durability parts, but the front brace and the diffuser supports both take direct hits.

PartBrandPriceWhy you buy it
Hot Racing Arrma 1/7 Aluminum Front Chassis Brace (Black) (opens in new tab)Hot Racing$28.88Front brace, sized for the 1/7 cars specifically
Hot Racing Arrma Limitless/Infraction Aluminum Rear Chassis Brace (Black) (opens in new tab)Hot Racing$28.88Rear brace
Xtreme Racing Arrma 6S 3mm Carbon Fiber Front Brace (opens in new tab)Xtreme Racing$19.99Carbon alternative to the aluminum front brace, lighter
Hot Racing Arrma Limitless/Infraction Aluminum Diffuse Supports (Black) (opens in new tab)Hot Racing$39.88Diffuser supports. The plastic ones break on the first tumble
Hot Racing Arrma Limitless Aluminum Rear Body Mount Support (opens in new tab)Hot Racing$33.88Rear body mount support

Suspension mounts and hardware

Arrma does not sell aluminum A-arms for these cars and nobody else makes them either, so the arms stay composite. The mounts they pivot in are the part you can upgrade.

PartBrandPriceWhy you buy it
Arrma EXB Aluminum Front Upper Suspension Mount (Red) (opens in new tab)Arrma$22.99Front upper mount, sets camber link geometry and takes the load in a nose-in hit
Hot Racing Arrma 1/8 Aluminum Front/Front Suspension Arm Mount (opens in new tab)Hot Racing$18.88Front inner mount
Hot Racing Arrma 1/8 Aluminum Rear/Rear Suspension Mount (opens in new tab)Hot Racing$18.88Rear inner mount
Arrma 17mm Aluminum Wheel Hex (Black) (2) (14.6mm) (opens in new tab)Arrma$9.99Correct 14.6mm width for the 1/7 cars. Getting this wrong is a common mistake
Arrma Aluminum Front Hub Nut (Red) (4) (opens in new tab)Arrma$12.99Hub nuts, four of them, cheap insurance
Arrma 5x50mm Steel Turnbuckle (2) (opens in new tab)Arrma$6.99Steel turnbuckles, which do not twist like the stock ones
Hot Racing Arrma 6S 3x7.8x10.5mm Steel Chrome Pivot Ball (Chrome) (4) (opens in new tab)Hot Racing$8.88Chrome pivot balls, the wear item inside every rod end

Some links on this page are affiliate links that support the site. They cost you nothing extra.

This kit also has manuals for:

Dial in your setup

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Get AI tips on your exact setup, track setup changes, and much more

Save your settings for 780+ cars, get personalized AI tuning answers for your exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use