Commonly replaced parts
The parts a 1/10 buggy goes through: arms, hubs and blocks, CVAs and axles, diff and slipper parts, shock rebuild parts, turnbuckles and ballstuds, plus the 4WD driveline wear items. Full list below.
| Part # | Description |
|---|---|
| 92624 (opens in new tab) | RC10B84 Front Suspension Arms, 73mm |
| 92588 (opens in new tab) | RC10B7 Rear Suspension Arms V2, 78mm |
| 92535 (opens in new tab) | RC10B84 Caster Block Set |
| 92171 (opens in new tab) | RC10B74 Steering Blocks |
| 92412 (opens in new tab) | RC10B7 Rear Hubs |
| 92547 (opens in new tab) | RC10B84 Hinge Pin Set |
| 92548 (opens in new tab) | HD CVA Bones, 78.5mm |
| 92212 (opens in new tab) | RC10B74 CVA Bones, 66 mm |
| 92191 (opens in new tab) | RC10B74 Front CVA Axle |
| 91859 (opens in new tab) | RC10B6.2 CVA Axles, +2mm |
| 92307 (opens in new tab) | RC10B74 FT LTC Differential Rebuild Set, plastic |
| 92133 (opens in new tab) | RC10B74 Differential Gasket and O-rings |
| 92149 (opens in new tab) | RC10B74 Center Diff Spur Gears, 72T/48P, 78T/48P |
| 92543 (opens in new tab) | RC10B84 FT Molded Ring And Pinion Set |
| 92264 (opens in new tab) | RC10B74.1 FT CVA Cup, Center, aluminum |
| 92215 (opens in new tab) | RC10B74 Center CVA Input Coupler |
| 91617 (opens in new tab) | 3x23 mm Shock Shaft V2, TiN |
| 91619 (opens in new tab) | 3x27.5 mm Shock Shafts (V2), TiN |
| 91493 (opens in new tab) | FT Low Friction X-Rings, 2.9 x 1.78 mm, for shocks |
| 92428 (opens in new tab) | FT 13mm Shock Pistons, 2.5mm, 2x1.9 |
| 92336 (opens in new tab) | Turnbuckles, M3.5 x 45mm, steel |
| 92308 (opens in new tab) | Ballcups, for 3.5mm turnbuckles |
| 91048 (opens in new tab) | Heavy-duty Ballstuds, 8 mm, long neck |
| 92609 (opens in new tab) | RC10T84 Bumper Set |
| 92623 (opens in new tab) | RC10B84 Front Shock Tower Cover, 73mm |
| 91563 (opens in new tab) | FT Bearings, 10x15x4 mm |
