Part numbers from Traxxas's own parts list for the Traxxas Slash Late Model, written out so you can search them. The original document is at the end of this page.
Full parts list
| Part # | Description | Qty |
|---|---|---|
| 3788A | Ball bearing kit, Slash® VXL/Bandit® VXL/Stampede® VXL/Rustler® VXL with 272R Transmission (complete) | |
| 3788R | Ball bearing kit, stainless steel, Slash® VXL/Bandit® VXL/Stampede® VXL/Rustler® VXL with 272R™ Transmission (complete) | |
| 5116 | Ball bearings, blue rubber sealed (5x11x4mm) (2) | 2 |
| 5114 | Ball bearings, blue rubber shield (5x8x2.5mm) (2) | 2 |
| 1985 | PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings) | 20 |
| 1926 | Antenna caps, vinyl (2)/ antenna spool | 2 |
| 1726 | Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) | 1 |
| 10417 | Body cage (front & rear, left & right) (fits #10411 body) | |
| 10414 | Body cage, driver/ retainers (3) (fits #10411 body) | |
| 10410 | Body completer kit (fits #10411 body) | |
| 10413 | Body reinforcement set (front & rear) (fits #10411 body) | |
| 10415 | Body reinforcement set, side (front, middle, rear) (left & right) (fits #10411 body) | |
| 10429 | Body spacer/ clip (for #10423 body) | |
| 10428 | Body support, front/ mount (for #10423 body) | |
| 10416 | Body washers (2)/ roof washers (5)/ 3x10mm CCS (7) (fits #10411 body) | 2 |
| 3698 | Access plug, rubber (receiver box) | |
| 5526 | Antenna crimp nut, aluminum (blue-anodized)/ antenna nut tool | |
| 5526R | Antenna crimp nut, aluminum (red-anodized)/ antenna nut tool | |
| 10422 | Body mounts (front & rear) (for clipless body mounting) | |
| 6940 | Body mounts (front & rear) (for clipless body mounting) | |
| 5624 | Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) | 2 |
| 10436 | Bumper, front (upper (1), lower (1)) | |
| 5836 | Bumper, rear/ bumper mount, rear (black) | |
| 5836P | Bumper, rear/ bumper mount, rear (pink) | |
| 5830 | Chassis conversion kit, low CG (Slash®) | |
| 5832 | Chassis, low CG (black) | |
| 5832A | Chassis, low CG (blue) | |
| 5832G | Chassis, low CG (grey) | |
| 5831 | Lower chassis, low CG (black) | |
| 5831A | Lower chassis, low CG (blue) | |
| 5831G | Lower chassis, low CG (grey) | |
| 5833 | Nerf bars, low CG (black) | |
| 10426 | Body, Slash® Late Model (clear, untrimmed, requires painting)/ decal sheets | |
| 10423X | Body, Slash® Late Model, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheets | |
| 10411 | Body, Slash® Modified (clear, trimmed, requires painting)/ decal sheets | |
| 5833A | Nerf bars, low CG (blue) | |
| 5833G | Nerf bars, low CG (grey) | |
| 5625 | Seal kit, receiver box (includes o-ring, seals, and silicone grease) | |
| 9482 | Differential gasket/ x-rings (2) | |
| 9492 | Idler gear, 30-tooth/ idler gear shaft (steel) | |
| 2381X | Main diff with steel ring gear/ side cover plate/ screws (Bandit, Stampede®, Rustler®) | |
| 9483 | Output gears, differential (2) | |
| 2382 | Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel | |
| 2388X | Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®) | |
| 5169 | Screws, 2.6x8mm countersunk machine (6) (EZ Start 2 motor) | 6 |
| 1647 | Silicone Grease | |
| 9150-BLUE | Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 2514 | Decal sheet, racing sponsors | |
| 10421 | Decal sheets, Slash® Modified (2) | 2 |
| 10425 | Interior, Slash® Late Model (black)/ decal sheet | |
| 10419 | Interior, Slash® Modified, black (painted)/ decal sheet | |
| 10412 | Latch, body mount (front & rear)/ front body support (fits #10411 body) | |
| 9950 | Official Team Traxxas® racing decal set(flag logo/ 6-color) | |
| 10424 | Wing, Slash® Late Model/ mounts (left & right) | |
| 10418 | Wing, Slash® Modified (black) | |
| 9059X | Cross pin (2)/ drive pin (2) (repairs 1 axle shaft) | |
| 9057X | Differential output shafts, steel-splined constant-velocity (2) | 2 |
| 6851A | Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) | 1 |
| 6852A | Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) | 1 |
| 5827 | Hold down, battery/ hold down retainer | |
| 6852R | Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) | |
| 9052X | Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) | |
| 9055X | Half shaft, external splined (steel-spline constant velocity) (1) | |
| 6750 | Half shaft, external splined (steel-spline constant velocity) (1) | |
| 9056X | Half shaft, internal splined (steel-spline constant velocity) (1) | |
| 6751 | Half shaft, internal splined (steel-spline constant velocity) (1) | |
| 6850X | Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4) | |
| 9058X | Rebuild kit, steel-splined constant-velocity driveshafts (includes pins and hardware for one axle shaft) | |
| 6854A | Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) | |
| 6754 | Stub axle, front, steel-splined constant velocity (1) | |
| 6753 | Stub axle, rear, steel-splined constant velocity (1) | |
| 9053X | Stub axle, rear, steel-splined constant velocity (1) | |
| 9137-GRN | Steering blocks, extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 9137-ORNG | Steering blocks, extreme heavy duty, orange (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 9137-RED | Steering blocks, extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 3637 | Axles (front) (2) | |
| 2530 | Bulkhead (front) (black) | |
| 2530A | Bulkhead (front) (grey) | |
| 9136-BLUE | Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) | |
| 9136-GRAY | Caster blocks (c-hubs), extreme heavy duty, gray (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) | |
| 9136-GRN | Caster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) | |
| 9136-ORNG | Caster blocks (c-hubs), extreme heavy duty, orange (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) | |
| 9181-ORNG | Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, orange (fits Slash® 2WD) | |
| 9181-RED | Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, red (fits Slash® 2WD) | |
| 3638R | Shock tower (rear) (for clipless body mounting) | |
| 9137-BLUE | Steering blocks, extreme heavy duty, blue (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 9137-GRAY | Steering blocks, extreme heavy duty, gray (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 3631X | Suspension arms, black, front, heavy duty (2) | 2 |
| 3631A | Suspension arms, blue, front, heavy duty (2) | 2 |
| 3631G | Suspension arms, green, front, heavy duty (2) | 2 |
| 3631T | Suspension arms, orange, front, heavy duty (2) | 2 |
| 3631R | Suspension arms, red, front, heavy duty (2) | 2 |
| 2640 | Suspension pins, 44mm (2) w/ E-clips | 2 |
| 3640 | Suspension screw pin set, steel (hex drive) (requires part # 2640 for a complete suspension pin set) (Rustler®, Stampede®, Bandit) | |
| 2532 | Tie bar, fiberglass | |
| 1935 | Turnbuckles, 36mm (2) | 2 |
| 9150-GRAY | Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 9150-GRN | Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 9150-ORNG | Carriers, stub axle, rear, extreme heavy duty, orange (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 9150-RED | Carriers, stub axle, rear, extreme heavy duty, red (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 9136-RED | Caster blocks (c-hubs), extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) | |
| 6846 | Linkage, steering (Revo) (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2) | |
| 5347 | Rod ends, Revo® (large) with hollow balls (12) | 12 |
| 3646 | Screws, 3x15mm flat-head machine (hex drive) (6) | 6 |
| 3639 | Shock tower (front) | |
| 3743G | Steering bellcranks, drag link (green-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) | |
| 3743T | Steering bellcranks, drag link (orange-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) | |
| 3743P | Steering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) | |
| 9181 | Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, black (fits Slash® 2WD) | |
| 9181-BLUE | Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, blue (fits Slash® 2WD) | |
| 9181-GRAY | Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, gray (fits Slash® 2WD) | |
| 9181-GRN | Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, green (fits Slash® 2WD) | |
| 6845X | Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering | |
| -RED | Steering blocks, extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit) | |
| 3139G | Turnbuckles, aluminum (green-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477) | |
| 3139T | Turnbuckles, aluminum (orange-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477) | |
| 3139P | Turnbuckles, aluminum (pink-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477) | |
| 3745 | Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls) | |
| 3935 | Body clip (mounting clip), angled, 90-degrees (10) | 10 |
| 3935A | Body clip (mounting clip), angled, 90-degrees (black) (10) | 10 |
| 4859 | CS 3x10 flathead (hex drive) | |
| 1589 | Double-sided adhesive tape (25mm x 25mm) | |
| 1633 | E-clips/ C-rings | |
| 3383 | BL-2s™ Electronic Speed Control, waterproof (brushless) (fwd/rev/brake) | |
| 3340 | Cooling fan, electronic speed control, Velineon® VXL-3s, VXL-4s or BL-2s™ | |
| 3790 | Gear adapter, fixed | |
| 2072A | Gear set (for 2070, 2075 servos) | |
| 3384 | Motor, BL-2s™ 3300, brushless | |
| 3931 | Screws, 3x8mm flat-head machine (hex drive) (6) | 6 |
| 2254 | Servo case, aluminum (middle) (blue-anodized) (for 2250, 2255 servos) | |
| 2253 | Servo case, aluminum (middle) (red-anodized) (for 2250, 2255 servos) | |
| 2251 | Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos) | |
| 2075R | Servo, digital high-speed, metal gear (ball bearing), waterproof | |
| 2075 | Servo, digital high-torque (ball bearing), waterproof | |
| 2250 | Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof | |
| 2255 | Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof | |
| 2075X | Servo, digital high-torque, metal gear (ball bearing), waterproof | |
| 2270 | Servo, digital high-torque, metal gear (ball bearing), waterproof | |
| 2827X | 3000mAh 7.4V 2-cell 20C LiPo iD Battery | |
| 2745 | Nuts, 3mm nylon locking (12) | 12 |
| 1747P | Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4) | 4 |
| 8347 | Nuts, 4mm flanged nylon locking, serrated (black) (10) | 10 |
| 1747 | Nuts, 4mm nylon locking (10) | 10 |
| 1747R | Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4) | 4 |
| 1747G | Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4) | 4 |
| 1747T | Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4) | 4 |
| 1747A | Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4) | 4 |
| 5525 | Rod ends (12)/ hollow balls (12) | |
| 2742X | Rod ends, short (6)/ hollow balls (6) | |
| 3215 | Screws, 2.5x6mm cap-head machine (hex drive) (6) | 6 |
| 3965 | Screws, 2.5x8mm cap-head machine (6) | 6 |
| 2577 | Screws, 3x10mm button-head machine (hex drive) (6) (use with #3744) | 6 |
| 2578 | Screws, 3x12mm button-head machine (hex drive) (6) | 6 |
| 2552 | Screws, 3x12mm countersunk machine (6) (hex drive) | 6 |
| 2579 | Screws, 3x15mm button-head machine (hex drive) (6) | 6 |
| 2586 | Screws, 3x15mm cap-head machine (hex drive) (6) | 6 |
| 2583 | Screws, 3x18 button-head machine (hex drive) (6) | 6 |
| 2580 | Screws, 3x20mm button-head machine (hex drive) (6) | 6 |
| 2591 | Screws, 3x23mm button-head machine (hex drive) (6) | 6 |
| 2582 | Screws, 3x30mm button-head machine (hex drive) (6) | 6 |
| 2592 | Screws, 3x40mm button-head machine (hex drive) (6) | 6 |
| 2575 | Screws, 3x6mm button-head machine (hex drive) (6) | 6 |
| 3932 | Screws, 3x6mm flat-head machine (hex drive) (6) | 6 |
| 2576 | Screws, 3x8mm button-head machine (hex drive) (6) | 6 |
| 2923X | 3000mAh 8.4V 7-cell flat NiMH Battery, Power Cell | |
| 2926X | 3000mAh 8.4V 7-cell hump NiMH Battery, Power Cell | |
| 2940X | 3300mAh 8.4V 7-cell flat NiMH Battery, Series 3 Power Cell | |
| 2941X | 3300mAh 8.4V 7-cell hump NiMH Battery, Series 3 Power Cell | |
| 2950X | 4200mAh 8.4V 7-cell flat NiMH Battery, Series 4 Power Cell | |
| 2951X | 4200mAh 8.4V 7-cell hump NiMH Battery, Series 4 Power Cell | |
| 2842X | 5000mah 7.4v 2-Cell 25C LiPo Battery | |
| 2960X | 5000mAh 8.4V 7-cell flat NiMH Battery, Series 5 Power Cell | |
| 2961X | 5000mAh 8.4V 7-cell hump NiMH Battery, Series 5 Power Cell | |
| 2844R | 5200mAh 7.4V 2-cell 35C LiPo iD Battery | |
| 2843X | 5800mAh 7.4V 2-cell 25C LiPo iD battery | |
| 2869X | 7600mah 7.4v 2-Cell 25C LiPo Battery | |
| 2976 | AC to DC adapter | |
| 2938X | Adapter, Traxxas® iD® LiPo battery (adapts Traxxas® iD® batteries to separate balance ports) | |
| 2943 | Battery charge indicators, green (4), grey (4), blue (4) | |
| 6548 | Battery door, TQ 2.4 transmitter (replacement for #6516, 6517 transmitter) | |
| 2914 | Battery, Power Cell AA Alkaline (4) | 4 |
| 2992 | Battery/charger completer pack (includes #2970 iD® charger (1), #2843X 5800mAh 7.4V 2-cell 25C LiPo iD® battery (1)) | |
| 2260 | BEC assembly (complete) (12.6 volts (3s LiPo) maximum input voltage) | |
| 2975 | Charger, D/C, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH) | |
| 2972 | Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery Identification | |
| 3937 | Screws, 4x12mm button-head machine (hex drive) (6) | 6 |
| 2542 | Screws, 4x12mm countersunk machine (hex drive) (6) | 6 |
| 2546 | Screws, 4x15mm countersunk machine (hex drive) (6) | 6 |
| 2743 | Set (grub) screws, 3mm hardened (12) | 12 |
| 5529 | Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4) | |
| 3967 | Shoulder screws 3x10 (6) (without threadlock) | 6 |
| 3642X | Shoulder screws, Ultra Shocks (3x12 hex drive) (6) | 6 |
| 2754 | Stub axle pins (4) | 4 |
| 2746 | Washers, 3x6mm metal (12) | 12 |
| 2973 | Charger, EZ-Peak Live Dual, 200W, NiMH/LiPo with iD Auto Battery Identification | |
| 2970 | Charger, EZ-Peak Plus, 4 amp, NiMH/LiPo with iD Auto Battery Identification | |
| 2981 | Charger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto Battery Identification | |
| 2985 | Charger, EZ-Peak®, USB-C, 40W, NiMH/LiPo with iD® Auto Battery Identification | |
| 2982 | Charger, USB-C, 40W (6 - 7 cell, 7.2 - 8.4 volt, NiMH) (with iD®) | |
| 6525 | Communication link, telemetry expander | |
| 2971 | EZ-Peak Live 12-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification and Bluetooth® | |
| 2978 | Fuse, D/C charger, 5A (2) (for #2974, 2975, 2977) | 2 |
| 9488 | Hardware kit, Slash VXL/Bandit VXL/Stampede VXL/Rustler VXL (contains all hardware used on Slash) | |
| 3350R | BL-2s Brushless Power System, waterproof (includes BL-2s ESC & BL-2s 3300 motor) | |
| 2968 | LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries) | |
| 6535 | Mount, temperature sensor (electric motors)/ wire tie/ thermal pad | |
| 2912 | Power adapter, AC, USB-C (45W) (110 volt, North America only) | |
| 2916 | Power cable, USB-C, 100W (high output), 5 ft. (1.5m) | |
| 6519 | Receiver, micro, TQ 2.4GHz (3-channel) | |
| 6533X | Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel) | |
| 6533 | Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel) | |
| 6552 | Seal kit, expander box (includes o-ring, seals, and silicone grease) | |
| 6520 | Sensor, RPM (long)/ 3x4mm BCS (1)/ 3x4 GS (1) | |
| 6521 | Sensor, temperature and voltage (long) | |
| 6553X | Telemetry Expander 2.0 and GPS module 2.0, TQi radio system | |
| 6538 | Telemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS (3) | |
| 5031 | Oil, shock (20 wt, 200 cSt, 60cc) (silicone) | |
| 5032 | Oil, shock (30 wt, 350 cSt, 60cc) (silicone) | |
| 5033 | Oil, shock (40 wt, 500 cSt, 60cc) (silicone) | |
| 5034 | Oil, shock (50 wt, 600 cSt, 60cc) (silicone) | |
| 5035 | Oil, shock (60 wt, 700 cSt, 60cc) (silicone) | |
| 5036 | Oil, shock (70 wt, 900 cSt, 60cc) (silicone) | |
| 5037 | Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone) | |
| 5029 | Shock oil bottle (60cc) (for mixing shock oil) | |
| 5038X | Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack) | |
| 5038 | Spinning carousel rack | |
| 7466X | Body, GTR long (hard-anodized, PTFE-coated aluminum) (1) | 1 |
| 7466-PINK | Body, GTR long (pink-anodized, PTFE-coated aluminum) (1) | 1 |
| 7466 | Body, GTR long shock, aluminum (blue-anodized, for GTR long shock, aluminum bodies) (1) | 1 |
| 7466G | Body, GTR long shock, aluminum (green-anodized, for GTR long shock, aluminum bodies) (1) | 1 |
| 7466A | Body, GTR long shock, aluminum (orange-anodized, for GTR long shock, aluminum bodies) (1) | 1 |
| 7466R | Body, GTR long shock, aluminum (red-anodized, for GTR long shock, aluminum bodies) (1) | 1 |
| 7467X | Body, GTR xx-long (hard-anodized, PTFE-coated aluminum) (1) | 1 |
| 7467-PINK | Body, GTR xx-long (pink-anodized, PTFE-coated aluminum) (1) | 1 |
| 7467 | Body, GTR xx-long shock, aluminum (blue-anodized) (PTFE-coated bodies) (1) | 1 |
| 7467G | Body, GTR xx-long shock, aluminum (green-anodized) (PTFE-coated bodies) (1) | 1 |
| 7467A | Body, GTR xx-long shock, aluminum (orange-anodized) (PTFE-coated bodies) (1) | 1 |
| 6540 | Telemetry trigger magnet, 5X2mm (1) | 1 |
| 6509A | TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver) | |
| 6507A | TQi 2.4 GHz High Output radio system, 4-channel with Traxxas® Link Bluetooth® module, TSM® (4-ch transmitter, 5-ch micro receiver) | |
| 6516 | Transmitter, TQ 2.4GHz, 2-channel (transmitter only) | |
| 6528X | Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 2-channel (transmitter only) | |
| 6529X | Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 3-channel (transmitter only) | |
| 6530X | Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 4-channel (transmitter only) | |
| 6511 | Traxxas Link Bluetooth module | |
| 6537 | Wire retainers, gear cover/ 3x4mm BCS (2) | 2 |
| 104364-74 | Slash Late Model: 1/10-Scale 2WD Oval Racer with TQ 2.4GHz radio system | |
| 7467R | Body, GTR xx-long shock, aluminum (red-anodized) (PTFE-coated bodies) (1) | 1 |
| 7468X | Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)) | |
| 7468 | Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)) | |
| 5475 | Multi-tool (plastic) | |
| 5158 | Nuts, 2.5mm nylon locking (12) | 12 |
| 7463 | Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks) | |
| 5462 | Rebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks | |
| 5469 | Rod ends (GTR shocks) | |
| 7464T | Shaft, GTR long, TiN-coated (2) | 2 |
| 7465T | Shaft, GTR xx-long, TiN-coated (2) | 2 |
| 7461 | Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) | 2 |
| 7461G | Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) | 2 |
| 7461-ORNG | Shocks, GTR long orange-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) | 2 |
| 7461-PINK | Shocks, GTR long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) | 2 |
| 7461-RED | Shocks, GTR long red-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) | 2 |
| 7461X | Shocks, GTR long, hard-anodized, PTFE-coated bodies, TiN shafts (fully assembled, without springs) (2) | |
| 7462-GRAY | Shocks, GTR xx-long (gray) (assembled) (2) (without springs) | |
| 7462 | Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) | 2 |
| 7462G | Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) | 2 |
| 7462-ORNG | Shocks, GTR xx-long orange-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) | 2 |
| 7462-PINK | Shocks, GTR xx-long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) | 2 |
| 7462-RED | Shocks, GTR xx-long red-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) | 2 |
| 2555X | Suspension arms, black, rear, heavy duty (2) | 2 |
| 2555A | Suspension arms, blue, rear, heavy duty (2) | 2 |
| 2555G | Suspension arms, green, rear, heavy duty (2) | 2 |
| 2555T | Suspension arms, orange, rear, heavy duty (2) | 2 |
| 2555R | Suspension arms, red, rear, heavy duty (2) | 2 |
| 8459 | Spring retainers, lower (captured) (4)/ 2.5x10 CS | 4/4 |
| 5427 | Spring, shock (GTR) (front 0.7 yellow) | 1 pair |
| 5428 | Spring, shock (GTR) (front) (0.9 rate orange) | 1 pair |
| 5432 | Spring, shock (GTR) (front) (1.3 rate gold) | 1 pair |
| 5429 | Spring, shock (GTR) (rear) (1.0 rate tan) | 1 pair |
| 5431 | Spring, shock (GTR) (rear) (1.2 rate silver) | 1 pair |
| 5430 | Spring, shock (GTR) (std. front) (1.1 rate green) | 1 pair |
| 7462X | Shocks, GTR xx-long, hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (without springs) | 2 |
| 6550X | Telemetry expander 2.0, TQi radio system (for use only with TQi radio) | |
| -GRAY | Shocks, GTR xx-long (gray) (assembled) (without springs) | 2 |
| 5433 | Spring, shock (GTR) (std. rear) (1.4 rate pink) (1 pair) | 1 pair |
| 5940 | Spring, shock (red) (GTR) (1.8 rate double green stripe) (1 pair) | 1 pair |
| 5941 | Spring, shock (red) (GTR) (2.0 rate double black stripe)( 1 pair) | 1 pair |
| 5942 | Spring, shock (red) (GTR) (2.3 rate double purple stripe) (1 pair) | 1 pair |
| 5434 | Spring, shock (white) (GTR) (1.6 rate blue) (1 pair) | 1 pair |
| 9494 | Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit®, Rustler®, Stampede®, Slash® 2WD) | |
| 2554 | Screws, 3x6mm caphead machine (hex drive) (6) | 6 |
| 5556 | Slipper pressure plate & hub (aluminum alloy) | |
| 9491 | Gear adapter set, fixed (48-pitch) | |
| 2416 | Gear, 16-T pinion (48-pitch) / set screw | |
| 1918 | Gear, 18-T pinion (48-pitch) / set screw | |
| 2419 | Gear, 19-T pinion (48-pitch) / set screw | |
| 2422 | Gear, 22-T pinion (48-pitch) (fits 3mm shaft)/ set screw | |
| 2423 | Gear, 23-T pinion (48-pitch) (fits 3mm shaft)/ set screw | |
| 2426 | Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw | |
| 4728 | Gear, 28-T pinion (48-pitch) (fits 3mm shaft)/ set screw | |
| 2429 | Gear, 29-T pinion (48-pitch) (fits 3mm shaft)/ set screw | |
| 2431 | Gear, 31-T pinion (48-pitch) (fits 3mm shaft)/ set screw | |
| 4725 | Gear, pinion (25-tooth) (48-pitch) / set screw | |
| 4676 | Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch) | |
| 4686 | Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch) | |
| 4690 | Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch) | |
| 3139X | Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477) | 2 |
| 9916 | Backpack, RC car carrier, 12" x 12" x 24" (fits TRX-4 & similar) | |
| 9917 | Duffel bag, medium, 30" x 12" x 12" (fits 1/10 Slash®, TRX-4®, & similar) | |
| 9909 | Traxxas® racing banner, red & black (3x7 feet) | |
| 5854 | Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469) | 4 |
| 2742 | Rod ends, long (6)/ hollow ball connectors (6) | |
| 3744 | Servo saver w/ adapters | |
| 10473X | Tires & wheels, assembled, glued (dirt oval, graphite gray wheels, Hoosier® tires, foam inserts) (2) (2WD front only) | |
| 10474X | Tires & wheels, assembled, glued (dirt oval, graphite gray wheels, Hoosier® tires, foam inserts) (2) (4WD front/rear, 2WD rear only) | |
| 10473R | Tires & wheels, assembled, glued (dirt oval, graphite gray wheels, Hoosier® tires, molded foam inserts) (2) (2WD front only) | |
| 10470X | Tires, Hoosier (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts (2) | |
| 10457-GRAY | Wheel discs (gray) (4) | 4 |
| 10457-GRN | Wheel discs (green) (4) | 4 |
| 10457-WHT | Wheel discs (white) (4) | 4 |
| 10457-YLW | Wheel discs (yellow) (4) | 4 |
| 1654 | Wheel hubs, hex (2)/ stub axle pins (2) | |
| 1654X | Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins(2) | |
| 3654 | Wheel hubs, hex (front) (tall offset) (2)/ axle pins (2.5x10mm) (2) | |
| 5353 | Wheel nuts, splined, 17mm (blue-anodized) (4) | 4 |
| 5480X | Wheel wrench, splined, 17mm | |
| 10471X | Wheels, dirt oval, graphite gray, dual profile (2.2” outer, 3.0” inner) (2) (2WD front only) | 2 |
| 10472X | Wheels, dirt oval, graphite gray, dual profile (2.2” outer, 3.0” inner) (2) (4WD front/rear, 2WD rear only) | 2 |
| 3739 | Screw pin set (Rustler®/ Bandit/ Stampede®) | |
| 9489 | Cover, gear | |
| 9480A | Differential assembly, center, complete (fits Pro Series Magnum 272R™ Transmission) | |
| 9481 | Differential with steel ring gear/ side cover plate/ gasket/ x-rings (2)/ 2.5x10mm BCS (4) | |
| 6783 | Gear set, differential (spider gears (4)/ spider gear shaft (2)) | |
| 9493 | Gearbox halves, left & right/ differential cover (charcoal gray) | |
| 5148 | Grease, white lithium | |
| 9490 | Plate, motor, 6061-T6 aluminum (blue-anodized) (3.2mm thick) | |
| 9490L | Plate, motor, lightweight machined 6061-T6 aluminum (blue-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2) | |
| 9490X | Plate, motor, lightweight machined 6061-T6 aluminum (blue-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2) | |
| 9490T | Plate, motor, lightweight machined 6061-T6 aluminum (gray-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2) | |
| 9490G | Plate, motor, lightweight machined 6061-T6 aluminum (green-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2) | |
| 9490A | Plate, motor, lightweight machined 6061-T6 aluminum (orange-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2) | |
| 9490P | Plate, motor, lightweight machined 6061-T6 aluminum (pink-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2) | |
| 9490R | Plate, motor, lightweight machined 6061-T6 aluminum (red-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2) | |
| 9464 | Wheelie bar mount (heavy duty) | |
| 3433X | Body reamer (aluminum handle) | |
| 3433 | Body reamer (plastic handle) | |
| 3436 | Cap, body reamer | |
| 3425 | Rubber pit mat, 16x24x0.28 | |
| 3426 | Rubber pit mat, 36x20 | |
| 3432 | Scissors, curved tip | |
| 3431 | Scissors, straight tip | |
| 8720 | Speed bit handle, large (overmolded) | |
| 8721 | Speed bit handle, medium (one piece) | |
| 8722 | Speed bit handle, premium (rubber overmold) | |
| 8716 | Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4" drive | |
| 8716X | Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4" drive | |
| 8715 | Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive | |
| 8715X | Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive | |
| 8714 | Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4" drive | |
| 2748R | Tool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint wrench) | |
| 8712 | Speed Bit Essentials Set, hex and nut driver, 7-piece, includes |



