| Part number | Part name |
|---|---|
| 106210 | HUDY GRAPHITE GREASE |
| 107871 | SELF-ADHESIVE FOAM STRIP (2) |
| 293353 | HUDY ALU SERVO SAVER FOR XRAY XB - SET |
| 302080 | CASTER CLIPS SET 4.3, 2.1, 1MM (2) |
| 302292 | STEEL STEERING BUSHING LONG (4) |
| 306301 | ANTENNA MOUNT - THIN |
| 306310 | ANTENNA (2) |
| 322660 | COMPOSITE BALL JOINT 5.4MM (12 + 1 + 1) |
| 326177 | COMPOSITE BATTERY CLAMP (2) |
| 335553 | COMPOSITE 2-SPEED GEAR 53T (2nd) - V3 |
| 337250 | STEEL PIVOT BALL 8.4MM (2) |
| 337253 | COMPOSITE ADJUSTING NUT M10x1 WITH BALL CUP (4) |
| 341134 | XR CARBON 1-PIECE CHASSIS |
| 341135 | XR CARBON FRONT SUSPENSION ARM (L + R) |
| 341203 | COMPOSITE BUMPER - DOWNFORCE |
| 341325 | XS COMPOSITE FRONT BODY POST (2) |
| 341331-M | COMPOSITE REAR BODY HOLDER - HIGHER - MEDIUM |
| 341360-M | COMPOSITE REAR BODY HOLDER SCREW - MEDIUM (2) |
| 341370-M | COMPOSITE REAR BODY HOLDER ARM - MEDIUM |
| 341380-M | COMPOSITE REAR BODY CENTERING PLATE - MEDIUM |
| 342019 | XR ALU LOWER BULKHEAD FRONT - RIGHT - SWISS 7075 T6 |
| 342029 | XR ALU LOWER BULKHEAD FRONT - LEFT - SWISS 7075 T6 |
| 342070 | COMPOSITE SET OF BUSHINGS (2) |
| 342150 | XR COMPOSITE SUSPENSION BALL JOINT ADAPTER (2) |
| 342160 | XR CARBON SHIM FOR BALL JOINT ADAPTER (2) |
| 342215-H | EXTRA ECCENTRIC STEERING BLOCK FOR AERO DISC - RIGHT - HARD |
| 342215-H | EXTRA ECCENTRIC STEERING BLOCK FOR AERO DISC - LEFT - HARD |
| 342293 | XR CARBON EXTENSION FOR STEERING BLOCK - 1 DOT (2) |
| 342350 | STEEL BUSHING 6MM (4) |
| 342360 | ALU SHIM 3.8x8x1.0MM (10) |
| 342460 | XR STEEL FRONT CENTER SPRING |
| 343031 | XR ALU LOWER BULKHEAD REAR - RIGHT - SWISS 7075 T6 |
| 343032 | XR ALU LOWER BULKHEAD REAR - LEFT - SWISS 7075 T6 |
| 343053 | XR GRAPHITE REAR BULKHEAD BRACE |
| 343054-K | XR ALU MOUNT FOR REAR BODY CENTERING PLATE |
| 343067 | XR STEEL BUSHING - SHORT + LONG |
| 343069 | STEEL BUSHING (2) |
| 345072 | FRONT ONE-WAY AXLE OUTDRIVE ADAPTER 27MM - LIGHTWEIGHT (2) |
| 345212 | ALU FRONT CV DRIVE AXLE - SWISS 7075 T6 - HARD COATED |
| 345221 | FRONT CV DRIVE SHAFT 37MM - HUDY SPRING STEEL ** |
| 345231 | DRIVE SHAFT COUPLING - HUDY SPRING STEEL ** |
| 345260-K | ALU FRONT WHEEL LOCK - SWISS 7075 T6 - BLACK (2) |
| 345280 | WHEEL SPRING (2) |
| 345291 | ALU SHIM 12 x 15 x 1.5MM (4) |
| 345292 | ALU SHIM 12 x 15 x 2.5MM (4) |
| 345360-K | ALU REAR WHEEL LOCK - SWISS 7075 T6 - BLACK (2) |
| 345468 | LOW FRICTION DRIVE BELT SIDE 6.0 x 705MM |
| 345513 | XR ALU REAR TRANSMISSION SHAFT 219MM - HARD COATED - SWISS 7075 T6 |
| 345533-K | XR ALU DRIVE FLANGE FOR SPUR GEAR - BLACK - SWISS 7075 T6 |
| 345561 | XR ALU MIDDLE SHAFT ADAPTER 31.3MM - SWISS 7075 T6 |
| 345714 | XR ALU FRONT SHAFT WITH ONE-WAY BEARINGS - SWISS 7075 T6 |
| 345932 | XR ALU SIDE BELT PULLEY 32T - HARD COATED - SWISS 7075 T6 |
| 345935 | XR ALU SIDE BELT PULLEY 35T - HARD COATED - SWISS 7075 T6 |
| 346138 | XR CARBON FRONT UPPER SUSPENSION PLATE (L + R) |
| 346141 | XR CARBON BATTERY HOLDER |
| 346190 | ROLL-OVER BAR - V2 |
| 346243 | XR CARBON ELECTRONICS PLATE |
| 346314 | XR ALU MOUNT 7.5MM - BLACK - SWISS 7075 T6 (2) |
| 346330 | XR ALU ROLL-OVER BAR HOLDER - BLACK - SWISS 7075 T6 |
| 347330 | REAR BODY HOLDER ARM PIN (2) |
| 349400 | BODY CLIP (10) |
| 353380 | ALU SHIM 4.7x5x1 (4) |
| 353381 | ALU SHIM 4.7x5x2 (4) |
| 362625 | ADJUSTABLE TURNBUCKLE 55MM M3.5 L/R - HUDY SPRING STEEL ** (2) |
| 362654 | HARD STEEL BALL END 5.4MM WITH THREAD 4MM - NICKEL COATED (2) |
| 362656 | HARD STEEL BALL END 5.4MM WITH THREAD 6MM - NICKEL COATED (2) |
| 366205 | ALU SERVO MOUNT 22MM - BOTH SIDES THREADED |
| 373078 | ALU REAR BRAKE MOUNT 15.5MM - BLACK (2) |
| 397311 | XRAY STICKER FOR BODY - WHITE |
| 106200 | HUDY MAGIC CLEANING GUM |
| 106205 | HUDY WASH BOX |
| 106213 | HUDY JOINT GREASE |
| 106250 | HUDY BEARING OIL |
| 106231 | HUDY ONE-WAY LUBE |
| 106281 | HUDY BODY FIX 28g/1oz |
| 106290 | HUDY ULTIMATE SOLDER 3M LENGTH |
| 107090 | HUDY BEARING CHECK TOOL |
| 107581 | WRENCH-GLOWPLUG / CLUTCHNUT 10 MM - LONG |
| 107602 | LIMITED EDITION - REAMER FOR BODY + COVER - LARGE |
| 107612 | LIMITED EDITION - EXHAUST SPRING / CASTER CLIP REMOVER |
| 107643 | LIMITED EDITION - ARM REAMER 3.0 MM |
| 107702 | CHASSIS DROP GAUGE SUPPORT BLOCKS (10MM) FOR 1/10 (2) |
| 107713 | CHASSIS RIDE HEIGHT GAUGE 0 MM TO 15 MM (1 MM STEPPED) |
| 107750 | HUDY GRAPHITE QUICK CAMBER GAUGE 1/10 TOURING 1.5°; 2°; 2.5° |
| 107761 | HUDY ADJUSTABLE CAMBER GAUGE 80MM |
| 107863 | HUDY ADJUSTABLE RIDE HEIGHT GAUGE 5-40MM |
| 107839 | HUDY CLEANING BRUSH - CHEMICAL RESISTANT - 2.5° |
| 107840 | CLEANING BRUSH LARGE - SOFT |
| 107841 | CLEANING BRUSH LARGE - MEDIUM |
| 107842 | CLEANING BRUSH LARGE - STIFF |
| 107843 | HUDY CLEANING BRUSH - CHEMICAL RESISTANT - 2.0° |
| 107846 | CLEANING BRUSH SMALL - SOFT |
| 107847 | CLEANING BRUSH SMALL - MEDIUM |
| 107848 | CLEANING BRUSH SMALL - STIFF |
| 107850 | HUDY PERSONAL RACING DISPLAY |
| 107851 | HUDY PIT LED |
| 107865 | HUDY PROFESSIONAL RACING STOPWATCH XL DISPLAY |
| 107895 | HUDY ULTIMATE DIGITAL SCALE 300g/0.01g |
| 107866 | HUDY PROFESSIONAL DIGITAL POCKET SCALE 3000g/0.1g |
| 107873 | HUDY BUMPER & BODY SPACE SPONGE SET |
| 107880 | HUDY ULTRA DOUBLE-SIDED TAPE |
| 107876 | HUDY ULTRA THIN DOUBLE-SIDED TAPE - SINGLE STRIP (5) |
| 107880 | CHASSIS BALANCING SIMPLE TOOL (2 PCS.) |
| 107900 | HUDY TWEAK STATION FOR 1/8 & 1/10 ON-ROAD CARS |
| 107903 | HUDY QUICK-TWEAK STATION 1/10 & 1/8 ON-ROAD NITRO CARS |
| 108001 | HUDY SET-UP STATION FOR 1/8 ON-ROAD CARS |
| 108051 | HUDY SET-UP TOOLSET 1/8 ON-ROAD CARS |
| 108070 | ALU SET-UP WHEEL FOR 1/8 ON-ROAD (4) |
| 108150 | HUDY TOURING CAR STAND |
| 108199 | HUDY ALU PARTS TRAY |
| 108192 | HUDY ALU PARTS TRAY NARROW 215x50mm |
| 108193 | HUDY ALU PARTS TRAY LARGE 215x100mm |
| 108195 | HUDY ALU PARTS TRAY COMPACT - MAGNETIC & ANTI-SLIP |
| 108501 | FLAT SET-UP BOARD 1/8 ON-ROAD - LIGHTWEIGHT - GREY |
| 108502 | FLAT SET-UP BOARD 1/8 ON-ROAD - LIGHTWEIGHT - SILVER GREY |
| 108503 | FLAT SET-UP BOARD 1/8 ON-ROAD - LIGHTWEIGHT - DARK GREY |
| 108504 | FLAT SET-UP BOARD 1/8 ON-ROAD - LIGHTWEIGHT - TITAN |
| 108505 | FLAT SET-UP BOARD 1/8 ON-ROAD - LIGHTWEIGHT - BLACK |
| 108560 | PLASTIC SET-UP BOARD DECAL 33x56mm - 1/8 ON-ROAD |
| 109000 | HUDY ALU TRAY FOR ON-ROAD DIFF & SHOCKS |
| 109010 | HUDY ALU TRAY FOR SET-UP SYSTEM |
| 109880 | HUDY ALU TRAY FOR ACCESSORIES & PIT LED |
| 111063 | LIMITED EDITION - UNIVERSAL HANDLE FOR EL SCREWDRIVER PINS |
| 111545 | LIMITED EDITION - ALLEN WRENCH 1.5 MM |
| 112045 | LIMITED EDITION - ALLEN WRENCH 2.0 MM |
| 112055 | LIMITED EDITION - ALLEN WRENCH 2.5 MM |
| 132045 | LIMITED EDITION - BALL ALLEN WRENCH 2.0MM |
| 132545 | LIMITED EDITION - BALL ALLEN WRENCH 2.5 MM |
| 175535 | LIMITED EDITION - SOCKET DRIVER 5.5MM |
| 177035 | LIMITED EDITION - SOCKET DRIVER 7.0MM |
| 181035 | HUDY SPRING STEEL TURNBUCKLE WRENCH 3.5MM |
| 181036 | ALU TURNBUCKLE WRENCH 3.5MM - SWISS 7075 T6 |
| 181090 | HUDY SPECIAL TOOL FOR TURNBUCKLES & NUTS |
| 182014 | HUDY BAIL JOINT WRENCH |
| 183011 | HUDY PROFESSIONAL NUT TOOL |
| 188970 | HUDY PROFESSIONAL TWEEZERS STRAIGHT |
| 188971 | HUDY PROFESSIONAL TWEEZERS CURVED |
| 188980 | HUDY BLADE HOBBY KNIFE WITH ALU HANDLE |
| 188984 | HUDY REPLACEABLE HOBBY KNIFE BLADES (10PCS) |
| 188991 | HUDY POCKET HOBBY KNIFE |
| 188985 | HUDY REPLACEABLE HOBBY KNIFE BLADES (5PCS) |
| 189090 | HUDY ULTIMATE BODY SCISSORS |
| 189000 | HUDY MICRO RC PLIERS SET + CARRYING BAG |
| 190002 | SET OF TOOLS + CARRYING BAG - FOR NITRO TOURING CARS |
| 190006 | PT SET OF TOOLS + CARRYING BAG - FOR ALL CARS |
| 190070 | SET OF POWER TOOL TIPS 2.0, 2.5, 3.0MM + 4.0, 5.8 PHILLIPS |
| 199011-H | HUDY HARD CASE - 230x180x45MM - TOOL BAG SMALL |
| 199060 | HUDY MICRO RC PLIERS BAG |
| 199060 | HUDY ALU TOOL STAND |
| 199110 | HUDY 1/10 CARRYING BAG - COMPACT |
| 199120 | HUDY 1/10 & 1/8 CARRYING BAG + TOOL BAG - EXCLUSIVE EDITION |
| 199150 | HUDY CARGO BAG - EXCLUSIVE EDITION |
| 199155-L | HUDY TRAVEL BAG - LARGE |
| 199157-M | HUDY HAND BAG - MEDIUM |
| 199157-L | HUDY HAND BAG - LARGE |
| 199170 | HUDY TRANSMITTER BAG - LARGE - EXCLUSIVE EDITION |
| 199171 | HUDY TRANSMITTER BAG - COMPACT - EXCLUSIVE EDITION |
| 199175 | HUDY HAND BAG - LARGE - EXCLUSIVE EDITION |
| 199175 | HUDY RADIO WINTER BAG - EXCLUSIVE EDITION |
| 199176 | HUDY HEAT PACK GEL |
| 199185 | HUDY CAR BAG - 1/8 ON-ROAD |
| 199185-H | HUDY HARD CASE - 540x305x175MM - 1/8 ON-ROAD CAR |
| 199190 | HUDY TEAM RUCKSACK |
| 199191 | HUDY TEAM BACKPACK XL |
| 199199 | HUDY EURO POUCH |
| 199212 | HUDY SET-UP BOARD BAG 1/8 ON-ROAD |
| 199231 | HUDY SET-UP BAG FOR 1/8 ON-ROAD CARS |
| 199260 | HUDY PIT LED BAG |
| 199270 | HUDY LIPO SAFETY BAG |
| 199271 | HUDY LIPO SAFETY BAG - COMPACT |
| 199280-M | HUDY OIL BAG - MEDIUM |
| 199280-L | HUDY OIL BAG - LARGE |
| 199280-H | HUDY HARD CASE - 140x110x95MM - OIL BAG MEDIUM |
| 199280-LH | HUDY HARD CASE - 180x140x120MM - OIL BAG LARGE |
| 199290 | HUDY ACCESSORIES BAG |
| 199290-H | HUDY HARD CASE - 235x190x75MM |
| 199291-H | HUDY HARD CASE - 135x85x75MM - ACCESSORIES / AIR VAC ON-ROAD |
| 199292-H | HUDY HARD CASE - 175x85x75MM - ACCESSORIES / AIR VAC 1/10 OFF-ROAD |
| 199293-H | HUDY HARD CASE - 175x110x75MM |
| 199294-H | HUDY HARD CASE - 215x90x85MM - ACCESSORIES / AIR VAC 1/8 OFF-ROAD |
| 199295-H | HUDY HARD CASE - 280x150x85MM - ACCESSORIES BAG LARGE |
| 199296-H | HUDY HARD CASE - 120x85x46MM - ACCESSORIES / STOP WATCH |
| 199297-H | HUDY HARD CASE - 320x220x145MM - ELECTRONICS |
| 199310 | HUDY PIT BAG - COMPACT |
| 199380 | HUDY PIT FOAM |
| 199390 | HUDY PIT APRON |
| 199910 | HUDY PIT MAT 750x1200MM |
| 199911 | HUDY PIT MAT ROLL 750L 1200MM |
| 199912 | HUDY PIT MAT ROLL 600x950MM |
| 199913 | HUDY PIT MAT FULL COLOR 650x950MM |
| 199914 | HUDY PIT MAT FULL COLOR 650x1200MM |
| 209065 | HUDY COMPACT CLEANING TOWEL (10) |
| 209073 | HUDY EXCLUSIVE PIT TOWEL 1100 x 700 |
| 286979 | HUDY FACE MASK |
| 293000 | LEAD WEIGHTS 4.5g & 4x10g WITH 3M GLUE |
| 293081 | HUDY PURE TUNGSTEN WEIGHT 5g |
| 293082 | HUDY PURE TUNGSTEN WEIGHT 10g |
| 293084 | PRECISION BALANCING CHASSIS WEIGHT 10g (4) |
| 293085 | HUDY PURE TUNGSTEN WEIGHT THIN ROUND 15mm WITH M3 - 10g |
| 293086 | HUDY PURE TUNGSTEN WEIGHT THIN - RECESIVER - 24.5x24.5MM - 15g |
| 293087 | HUDY PURE TUNGSTEN WEIGHT THIN - SPEEDO - 31x26MM - 20g |
| 293111 | HUDY BRUSHLESS RC FAN 40MM - WITH EXTERNAL SOLDERING TABS |
| 293113 | HUDY BRUSHLESS RC FAN 40MM - WITH INTERNAL SOLDERING TABS |
| 293401 | ALU CLAMP SERVO HORN - KD PROPO JR, SANWA, AIRTRONICS - OFFSET - 2ST |
| 293402 | ALU CLAMP SERVO HORN - HITEC - OFFSET- 24T |
| 293403 | ALU CLAMP SERVO HORN - FUTABA - OFFSET - 2ST |
| 293491 | ALU SERVO HORN - KO PROPO, JR, SANWA, AIRTRONICS - OFFSET - 23T |
| 293492 | ALU SERVO HORN - HITEC - OFFSET- 24T |
| 293493 | ALU SERVO HORN - FUTABA - OFFSET - 2ST - V2 |
| 294213 | HUDY PINION GEAR - HARD STEEL - 13T / 32 (MODULE 0.8) |
| 294214 | HUDY PINION GEAR - HARD STEEL - 14T / 32 (MODULE 0.8) |
| 294215 | HUDY PINION GEAR - HARD STEEL - 15T / 32 (MODULE 0.8) |
| 294216 | HUDY PINION GEAR - HARD STEEL - 16T / 32 (MODULE 0.8) |
| 294217 | HUDY PINION GEAR - HARD STEEL - 17T / 32 (MODULE 0.8) |
| 294218 | HUDY PINION GEAR - HARD STEEL - 18T / 32 (MODULE 0.8) |
| 294219 | HUDY PINION GEAR - HARD STEEL - 19T / 32 (MODULE 0.8) |
| 294220 | HUDY PINION GEAR - HARD STEEL - 20T / 32 (MODULE 0.8) |
| 294221 | HUDY PINION GEAR - HARD STEEL - 21T / 32 (MODULE 0.8) |
| 294222 | HUDY PINION GEAR - HARD STEEL - 22T / 32 (MODULE 0.8) |
| 294224 | HUDY PINION GEAR - HARD STEEL - 24T / 32 (MODULE 0.8) |
| 294225 | HUDY PINION GEAR - HARD STEEL - 25T / 32 (MODULE 0.8) |
| 294253 | HUDY ALU PINION GEAR - HARD COATED - 14T / 32 (MODULE 0.8) |
| 294254 | HUDY ALU PINION GEAR - HARD COATED - 17T / 32 (MODULE 0.8) |
| 294255 | HUDY ALU PINION GEAR - HARD COATED - 15T / 32 (MODULE 0.8) |
| 294256 | HUDY ALU PINION GEAR - HARD COATED - 16T / 32 (MODULE 0.8) |
| 294257 | HUDY ALU PINION GEAR - HARD COATED - 17T / 32 (MODULE 0.8) |
| 294258 | HUDY ALU PINION GEAR - HARD COATED - 18T / 32 (MODULE 0.8) |
| 294259 | HUDY ALU PINION GEAR - HARD COATED - 19T / 32 (MODULE 0.8) |
| 294260 | HUDY ALU PINION GEAR - HARD COATED - 20T / 32 (MODULE 0.8) |
| 294261 | HUDY ALU PINION GEAR - HARD COATED - 21T / 32 (MODULE 0.8) |
| 294262 | HUDY ALU PINION GEAR - HARD COATED - 22T / 32 (MODULE 0.8) |
| 294263 | HUDY ALU PINION GEAR - HARD COATED - 23T / 32 (MODULE 0.8) |
| 294264 | HUDY ALU PINION GEAR - HARD COATED - 24T / 32 (MODULE 0.8) |
| 294266 | HUDY ALU PINION GEAR - HARD COATED - 27T / 32 (MODULE 0.8) |
| 296509 | ALU COUNTERSUNK SERVO SHIM (10) |
| 296509-K | ALU COUNTERSUNK SERVO SHIM - BLACK (10) |
| 296509-O | ALU COUNTERSUNK SERVO SHIM - ORANGE (10) |
| 296510 | ALU COUNTERSUNK SHIM (10) |
| 296510-B | ALU COUNTERSUNK SHIM - BLUE (10) |
| 296510-O | ALU COUNTERSUNK SHIM - ORANGE (10) |
| 296510-V | ALU COUNTERSUNK SHIM - VIOLET (10) |
| 296530-B | ALU NUT M3 - BLUE (10) |
| 296530-K | ALU NUT M3 - BLACK (10) |
| 296540-B | ALU NUT M4 - BLUE (10) |
| 296540-O | ALU NUT M4 - ORANGE (10) |
| 296540-K | ALU NUT M4 - BLACK (10) |
| 298010 | HUDY HARDWARE BOX - DOUBLE-SIDED |
| 298011 | HUDY HARDWARE BOX - DOUBLE-SIDED - COMPACT |
| 298012 | HUDY PARTS BOX - 10-COMPARTMENTS |
| 298013 | HUDY SPRINGS BOX - 10-COMPARTMENTS |
| 298014 | HUDY PARTS BOX - 8-COMPARTMENTS |
| 298015 | HUDY PARTS CASE - 290 x 195mm |
| 298016 | HUDY TINY HARDWARE BOX - 4-COMPARTMENTS |
| 298017 | HUDY TINY ONE-PIECE HARDWARE BOX - 8-COMPARTMENTS |
| 298018 | HUDY TINY HARDWARE BOX - 8-COMPARTMENTS |
| 298019 | HUDY DIFF BOX - 8-COMPARTMENTS |
| 298021 | HUDY HARDWARE BOX - DOUBLE-SIDED - SMALL |
| 298022 | HUDY TINY HARDWARE BOX - 10-COMPARTMENTS |
| 298025 | HUDY PARTS CASE - 275 x 180mm |
| 298100 | HUDY TIN ROUND BOX 80x80MM |
| 903306-T | HUDY TITANIUM HEX FLAT HEAD SCREW SFH M3x6 (10) |
| 908306-T | HUDY TITANIUM HEX SUPER LOW HEAD SCREW SHL M3x6 (10) |
| 990014 | HUDY TITANIUM BALL STUD D=5.4 / L=4 / S=4.5 / 2MM HEX (2) |
| 990016 | HUDY TITANIUM BALL STUD D=3.4 / L=6 / S=4.5 / 2MM HEX (2) |
| 990018 | HUDY TITANIUM BALL STUD D=5.4 / L=8 / S=4.5 / 2MM HEX (2) |
| 992385 | HUDY TITANIUM ADJUSTABLE TURNBUCKLE 55MM M3.5 L/R (2) |
| 941218 | BALL-BEARING 12x18x4 RUBBER SEALED - OIL (2) |
| 950150 | BALL-BEARING 5x10x4 FLANGED - STEEL SEALED - OIL (2) |
| 900030 | NUT M3 (10) |
| 960023 | NUT M3 - BLACK (10) |
| 960042 | NUT M4 (10) |
| 961032 | WASHER S 3.2 (10) |
| 961260 | CH-CLIP 12 (10) |
| 964004 | C-CLIP (14) (10) |
| 972030 | SILICONE O-RING 3/2 (10) |
| 972035 | SILICONE O-RING 3.5x2 (10) |
| 980262 | PIN 2.5x12 (10) |
| 980313 | PIN 3x16 (10) |
| 980320 | PIN 3x20 (10) |
| 980322 | PIN 3x22 (10) |
| 345230 | DRIVE SHAFT COUPLING - HUDY SPRING STEEL ** |
| 345260-O | ALU FRONT WHEEL LOCK - SWISS 7075 T6 - ORANGE (2) |
| 345270 | GRAFFITE FRONT AERODYNAMIC DISC 2.2MM - LEFT + RIGHT - SET |
| 345293 | ALU SHIM 12 x 15 x 1.0MM (4) |
| 345360-O | ALU REAR WHEEL LOCK - SWISS 7075 T6 - ORANGE (2) |
| 345793 | XR ALU SIDE BELT PULLEY 34T - HARD COATED - SWISS 7075 T6 |
| 345939 | XR ALU SIDE BELT PULLEY 36T - HARD COATED - SWISS 7075 T6 |
| 346123-S | XR GRAPHITE FAN HOLDER - SET |
| 346244 | XR CARBON ELECTRONICS PLATE - SHORT |
| 347331 | ALU REAR BODY HOLDER ARM PIN - HARD COATED (2) |
| 348100 | XR CENTER DAMPENER - SET |
| 356219 | COMPOSITE SERVO SHIMS 1.0, 1.5 & 2.5MM (2+2+2) |
| 362658 | HARD STEEL BALL END 5.4MM WITH THREAD 8MM - NICKEL COATED (2) |
| 362660 | HARD STEEL BALL END 5.4MM WITH THREAD 10MM - NICKEL COATED (2) |
| 397312 | XRAY STICKER FOR BODY - METALLIC SILVER |
| 397313 | XRAY STICKER FOR BODY - PURPLE |
| 397314 | XRAY STICKER FOR BODY - NEON RED |
| 397315 | XRAY STICKER FOR BODY - NEON YELLOW |
| 397316 | XRAY STICKER FOR BODY - NEON ORANGE |
| 397320 | XRAY STICKERS FOR BODY - 5 DIFFERENT COLORS |
| 911308 | HEX SCREW FLANGED SH M3x8 (10) |
| 911310 | HEX SCREW FLANGED SH M3x10 (10) |
| 931218 | BALL-BEARING 12x18x4 STEEL SEALED - OIL (2) |
| 960031 | ALU NUT M3 (10) |
| 960033 | NUT M3 - THIN (10) |
| 980320-T | TITANIUM PIN M3x20 (2) |
| 980322-T | TITANIUM PIN 3x22 (2) |
.avif)
.avif)