
Car Not Handling Right?
Diagnose understeer, oversteer, traction rolling and more — by symptom.
No setups found
No public setups have been shared for this car model yet.
Have a setup for the X8 '26?
Share your setup sheet with the community — we'll fill in the details automatically.
Stock gearing for the XRAY X8 '26, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 11T | 4.82 | 4.82 |
| 12T | 4.42 | 4.42 |
| 13T | 4.08 | 4.08 |
| 14T | 3.79 | 3.79 |
| 15T | 3.53 | 3.53 |
| 16T | 3.31 | 3.31 |
| 17T | 3.12 | 3.12 |
| 18T | 2.94 | 2.94 |
| 19T | 2.79 | 2.79 |
| 20T | 2.65 | 2.65 |
| 21T | 2.52 | 2.52 |
| 22T | 2.41 | 2.41 |
What pinion should I run?
Tell us your motor and track and get a starting pinion for the XRAY X8 '26, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →It depends on your motor and the track. A hotter motor (lower turns, higher KV) takes a smaller pinion; a tight track wants a lower gear than an open one. Start near the middle of the pinions the X8 '26 shipped with, run a few minutes, and check motor temperature before going up a tooth. The So Dialed Pinion Recommender gives a starting pinion for your motor where we have class data.
The X8 '26 has an internal ratio of 1:1. Final drive ratio = spur ÷ pinion × 1. With the stock 53T spur, a 11T pinion gives an FDR of 4.82 and a 22T gives 2.41.
53 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Free to start · iOS & Android
Your XRAY X8 '26 is in the RC Setup App
Save every setup change you make to your XRAY X8 '26, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

