Have a setup for the EXECUTE XQ2S 4WD?
Share your setup sheet with the community — we'll fill in the details automatically.
Stock gearing for the Xpress EXECUTE XQ2S 4WD, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 20T | 5.80 | 11.02 |
| 21T | 5.52 | 10.50 |
| 22T | 5.27 | 10.02 |
| 23T | 5.04 | 9.58 |
| 24T | 4.83 | 9.18 |
| 25T | 4.64 | 8.82 |
| 26T | 4.46 | 8.48 |
| 27T | 4.30 | 8.16 |
| 28T | 4.14 | 7.87 |
| 29T | 4.00 | 7.60 |
| 30T | 3.87 | 7.35 |
| 31T | 3.74 | 7.11 |
| 32T | 3.63 | 6.89 |
| 33T | 3.52 | 6.68 |
| 34T | 3.41 | 6.48 |
| 35T | 3.31 | 6.30 |
| 36T | 3.22 | 6.12 |
| 37T | 3.14 | 5.96 |
| 38T | 3.05 | 5.80 |
| 39T | 2.97 | 5.65 |
| 40T | 2.90 | 5.51 |
| 41T | 2.83 | 5.38 |
| 42T | 2.76 | 5.25 |
| 43T | 2.70 | 5.13 |
| 44T | 2.64 | 5.01 |
| 45T | 2.58 | 4.90 |
| 46T | 2.52 | 4.79 |
| 47T | 2.47 | 4.69 |
| 48T | 2.42 | 4.59 |
| 49T | 2.37 | 4.50 |
| 50T | 2.32 | 4.41 |
| 51T | 2.27 | 4.32 |
| 52T | 2.23 | 4.24 |
Shaded rows are the pinions most 1/10 4WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Xpress EXECUTE XQ2S 4WD, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →It depends on your motor and the track. In the 1/10 4WD touring/gt class, racers gear by final drive ratio: 6T and below near 7.34, 13.5T near 4.51, 17.5T near 4.51, 21.5T and up near 3.65. On the EXECUTE XQ2S 4WD's stock 116T spur that is about 30T for 6T and below, 49T for 13.5T, 49T for 17.5T, 60T for 21.5T and up. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the EXECUTE XQ2S 4WD selected.
The EXECUTE XQ2S 4WD has an internal ratio of 1.9:1. Final drive ratio = spur ÷ pinion × 1.9. With the stock 116T spur, a 20T pinion gives an FDR of 11.02 and a 52T gives 4.24.
116 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit shock setup (AsphaltMedGrip). Part numbers link to AMain.
Out of the box the EXECUTE XQ2S 4WD runs 450 cst front, 450 cst rear, on 4-hole front, 4-hole rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
The kit springs are Silver medium (#XP-10169) front, Silver medium (#XP-10169) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
The kit diff fluid is 5,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.
Free to start · iOS & Android
Your Xpress EXECUTE XQ2S 4WD is in the RC Setup App
Save every setup change you make to your Xpress EXECUTE XQ2S 4WD, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

