Car Not Handling Right?
Diagnose understeer, oversteer, traction rolling and more — by symptom.
Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the Inferno MP11e?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Kyosho Inferno MP11e, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 12T | 4.83 | 15.99 |
| 13T | 4.46 | 14.76 |
| 14T | 4.14 | 13.70 |
| 15T | 3.87 | 12.79 |
| 16T | 3.63 | 11.99 |
| 17T | 3.41 | 11.29 |
| 18T | 3.22 | 10.66 |
| 19T | 3.05 | 10.10 |
Shaded rows are the pinions most 1/8 4WD buggy setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Kyosho Inferno MP11e, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Kyosho Inferno MP11e?
It depends on your motor and the track. In the 1/8 4WD buggy class, racers gear by final drive ratio: 1800–2300 Kv near 10.06. On the Inferno MP11e's stock 58T spur that is about 19T for 1800–2300 Kv. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the Inferno MP11e selected.
What is the internal ratio (transmission ratio) of the Kyosho Inferno MP11e?
The Inferno MP11e has an internal ratio of 3.308:1. Final drive ratio = spur ÷ pinion × 3.308. With the stock 58T spur, a 12T pinion gives an FDR of 15.99 and a 19T gives 10.10.
How many teeth is the stock spur gear on the Kyosho Inferno MP11e?
58 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 500 cst
- Rear
- 550 cst
- Front
- 72mm Brown 8.5-1.6 #IFS005-8516 →
- Rear
- 86mm Black 10.5-1.6 #IFS006-10516 →
- Front
- 8 x 1.2mm #IF347-128 →
- Rear
- 8 x 1.3mm #IF347-138 →
- Front
- 7,000 cst
- Center
- 10,000 cst
- Rear
- 3,000 cst
What shock oil does the Kyosho Inferno MP11e come with?
Out of the box the Inferno MP11e runs 500 cst front, 550 cst rear (Kyosho oil), on 8 x 1.2mm (#IF347-128) front, 8 x 1.3mm (#IF347-138) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Kyosho Inferno MP11e come with?
The kit springs are 72mm Brown 8.5-1.6 (#IFS005-8516) front, 86mm Black 10.5-1.6 (#IFS006-10516) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
What diff fluid does the Kyosho Inferno MP11e come with?
The kit diff fluid is 7,000 cst front, 10,000 cst center, 3,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.
Setup Help
All 1/8 Off-Road Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Kyosho Inferno MP11e is in the RC Setup App
Save every setup change you make to your Kyosho Inferno MP11e, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
