No setups found
No public setups have been shared for this car model yet.
Have a setup for the MTS FFV4 Dolphin?
Share your setup sheet with the community — we'll fill in the details automatically.
Stock gearing for the Race Opt MTS FFV4 Dolphin, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 36T | 2.33 | 3.73 |
| 37T | 2.27 | 3.63 |
| 38T | 2.21 | 3.54 |
| 39T | 2.15 | 3.45 |
| 40T | 2.10 | 3.36 |
| 41T | 2.05 | 3.28 |
| 42T | 2.00 | 3.20 |
| 43T | 1.95 | 3.13 |
| 44T | 1.91 | 3.05 |
| 45T | 1.87 | 2.99 |
| 46T | 1.83 | 2.92 |
| 47T | 1.79 | 2.86 |
Shaded rows are the pinions most 1/10 FWD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Race Opt MTS FFV4 Dolphin, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →It depends on your motor and the track. In the 1/10 FWD touring/gt class, racers gear by final drive ratio: 17.5T near 4.51. On the MTS FFV4 Dolphin's stock 84T spur that is about 30T for 17.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the MTS FFV4 Dolphin selected.
The MTS FFV4 Dolphin has an internal ratio of 1.6:1. Final drive ratio = spur ÷ pinion × 1.6. With the stock 84T spur, a 36T pinion gives an FDR of 3.73 and a 47T gives 2.86.
84 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Free to start · iOS & Android
Your Race Opt MTS FFV4 Dolphin is in the RC Setup App
Save every setup change you make to your Race Opt MTS FFV4 Dolphin, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

