Ask Miles, our Setup AI that’s been trained on the ATOM 2.
Stock gearing for the Schumacher ATOM 2, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR | Rollout |
|---|---|---|---|
| 30T | 2.13 | 2.13 | 63.3 mm |
| 31T | 2.06 | 2.06 | 65.4 mm |
| 32T | 2.00 | 2.00 | 67.5 mm |
| 33T | 1.94 | 1.94 | 69.7 mm |
| 34T | 1.88 | 1.88 | 71.8 mm |
| 35T | 1.83 | 1.83 | 73.9 mm |
| 36T | 1.78 | 1.78 | 76.0 mm |
| 37T | 1.73 | 1.73 | 78.1 mm |
| 38T | 1.68 | 1.68 | 80.2 mm |
Shaded rows are the pinions most 1/12 2WD touring/gt setups run on the stock spur. Rollout at a 43 mm tire.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Schumacher ATOM 2, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain → (opens in new tab)It depends on your motor and the track. Racers in the 1/12 2WD touring/gt class run a 32–36 tooth pinion in most setups, usually on a 66T spur for a final drive ratio near 1.96. Hotter motors (lower turns, higher Kv) take a smaller pinion; tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the ATOM 2 selected.
The ATOM 2 has an internal ratio of 1:1. Final drive ratio = spur ÷ pinion × 1. With the stock 64T spur, a 30T pinion gives an FDR of 2.13 and a 38T gives 1.68.
64 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit shock setup. Part numbers link to AMain.
The kit springs are Silver (#U4843) front, Silver (#U4839) side. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Free to start · iOS & Android
Your Schumacher ATOM 2 is in the RC Setup App
Save every setup change you make to your Schumacher ATOM 2, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

