Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the Medius X25?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Serpent Medius X25, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 20T | 5.50 | 11.00 |
| 21T | 5.24 | 10.48 |
| 22T | 5.00 | 10.00 |
| 23T | 4.78 | 9.57 |
| 24T | 4.58 | 9.17 |
| 25T | 4.40 | 8.80 |
| 26T | 4.23 | 8.46 |
| 27T | 4.07 | 8.15 |
| 28T | 3.93 | 7.86 |
| 29T | 3.79 | 7.59 |
| 30T | 3.67 | 7.33 |
| 31T | 3.55 | 7.10 |
| 32T | 3.44 | 6.88 |
| 33T | 3.33 | 6.67 |
| 34T | 3.24 | 6.47 |
| 35T | 3.14 | 6.29 |
| 36T | 3.06 | 6.11 |
| 37T | 2.97 | 5.95 |
| 38T | 2.89 | 5.79 |
| 39T | 2.82 | 5.64 |
| 40T | 2.75 | 5.50 |
| 41T | 2.68 | 5.37 |
| 42T | 2.62 | 5.24 |
| 43T | 2.56 | 5.12 |
| 44T | 2.50 | 5.00 |
| 45T | 2.44 | 4.89 |
| 46T | 2.39 | 4.78 |
| 47T | 2.34 | 4.68 |
| 48T | 2.29 | 4.58 |
| 49T | 2.24 | 4.49 |
| 50T | 2.20 | 4.40 |
| 51T | 2.16 | 4.31 |
| 52T | 2.12 | 4.23 |
Shaded rows are the pinions most 1/10 4WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Serpent Medius X25, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Serpent Medius X25?
It depends on your motor and the track. In the 1/10 4WD touring/gt class, racers gear by final drive ratio: 6T and below near 7.34, 13.5T near 4.51, 17.5T near 4.51, 21.5T and up near 3.65. On the Medius X25's stock 110T spur that is about 30T for 6T and below, 49T for 13.5T, 49T for 17.5T, 60T for 21.5T and up. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the Medius X25 selected.
What is the internal ratio (transmission ratio) of the Serpent Medius X25?
The Medius X25 has an internal ratio of 2:1. Final drive ratio = spur ÷ pinion × 2. With the stock 110T spur, a 20T pinion gives an FDR of 11.00 and a 52T gives 4.23.
How many teeth is the stock spur gear on the Serpent Medius X25?
110 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup (Carbon). Part numbers link to AMain.
- Front
- 350 cst
- Rear
- 350 cst
- Front
- 2.6lb Yellow
- Rear
- 2.6lb Yellow
What shock oil does the Serpent Medius X25 come with?
Out of the box the Medius X25 runs 350 cst front, 350 cst rear (Serpent oil). That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Serpent Medius X25 come with?
The kit springs are 2.6lb Yellow front, 2.6lb Yellow rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Setup Help
All Touring Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Serpent Medius X25 is in the RC Setup App
Save every setup change you make to your Serpent Medius X25, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
