Ask Miles, our Setup AI that’s been trained on the Apollo II eEVO.
Stock gearing for the SWORKz Apollo II eEVO, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 12T | 3.83 | 12.68 |
| 13T | 3.54 | 11.71 |
| 14T | 3.29 | 10.87 |
| 15T | 3.07 | 10.14 |
| 16T | 2.88 | 9.51 |
| 17T | 2.71 | 8.95 |
| 18T | 2.56 | 8.45 |
| 19T | 2.42 | 8.01 |
Shaded rows are the pinions most 1/8 4WD buggy setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the SWORKz Apollo II eEVO, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain → (opens in new tab)It depends on your motor and the track. In the 1/8 4WD buggy class, racers gear by final drive ratio: 1800–2300 Kv near 10.06. On the Apollo II eEVO's stock 46T spur that is about 15T for 1800–2300 Kv. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the Apollo II eEVO selected.
The Apollo II eEVO has an internal ratio of 3.308:1. Final drive ratio = spur ÷ pinion × 3.308. With the stock 46T spur, a 12T pinion gives an FDR of 12.68 and a 19T gives 8.01.
46 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit shock setup. Part numbers link to AMain.
The kit springs are 70mm S3-dot 1.6x8.50 (#115170) front, 86mm L2 dot 1.6x10.75 (#115168) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Free to start · iOS & Android
Your SWORKz Apollo II eEVO is in the RC Setup App
Save every setup change you make to your SWORKz Apollo II eEVO, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

