Apollo II Pro Nitro

SWORKz Apollo II Pro Nitro

Q&A, gearing, kit settings, manual, and guides

Off-road•Buggy•1/8 scale•4WD•Nitro

Ask Miles, our Setup AI that’s been trained on the Apollo II Pro Nitro.

Setups

Get Apollo II Pro Nitro alerts
Be the first to share a setup for the Apollo II Pro Nitro
Upload your sheet, we fill in the details
Add your setup

Gearing

Stock gearing for the SWORKz Apollo II Pro Nitro, with common pinions and their ratios.

Stock spur
46T
Internal ratio
3.308:1
Typical pinion
1800–2300 Kv ≈ 15T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
12T3.8312.68
13T3.5411.71
14T3.2910.87
15T3.0710.14
16T2.889.51
17T2.718.95
18T2.568.45
19T2.428.01

Shaded rows are the pinions most 1/8 4WD buggy setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the SWORKz Apollo II Pro Nitro, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the SWORKz Apollo II Pro Nitro?

It depends on your motor and the track. In the 1/8 4WD buggy class, racers gear by final drive ratio: 1800–2300 Kv near 10.06. On the Apollo II Pro Nitro's stock 46T spur that is about 15T for 1800–2300 Kv. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the Apollo II Pro Nitro selected.

What is the internal ratio (transmission ratio) of the SWORKz Apollo II Pro Nitro?

The Apollo II Pro Nitro has an internal ratio of 3.308:1. Final drive ratio = spur ÷ pinion × 3.308. With the stock 46T spur, a 12T pinion gives an FDR of 12.68 and a 19T gives 8.01.

How many teeth is the stock spur gear on the SWORKz Apollo II Pro Nitro?

46 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Springs
Front
70mm S3-dot 1.6x8.50 #115170 →
Rear
86mm L2 dot 1.6x10.75 #115168 →
Pistons
Front
6 x 1.3mm #330562A →
Rear
6 x 1.3mm #330562A →

What springs does the SWORKz Apollo II Pro Nitro come with?

The kit springs are 70mm S3-dot 1.6x8.50 (#115170) front, 86mm L2 dot 1.6x10.75 (#115168) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your SWORKz Apollo II Pro Nitro is in the RC Setup App

Save every setup change you make to your SWORKz Apollo II Pro Nitro, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use