Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the S35-3E?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the SWORKz S35-3E, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 12T | 3.83 | 12.68 |
| 13T | 3.54 | 11.71 |
| 14T | 3.29 | 10.87 |
| 15T | 3.07 | 10.14 |
| 16T | 2.88 | 9.51 |
| 17T | 2.71 | 8.95 |
| 18T | 2.56 | 8.45 |
| 19T | 2.42 | 8.01 |
Shaded rows are the pinions most 1/8 4WD buggy setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the SWORKz S35-3E, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the SWORKz S35-3E?
It depends on your motor and the track. In the 1/8 4WD buggy class, racers gear by final drive ratio: 1800–2300 kV near 10.06. On the S35-3E's stock 46T spur that is about 15T for 1800–2300 kV. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the S35-3E selected.
What is the internal ratio (transmission ratio) of the SWORKz S35-3E?
The S35-3E has an internal ratio of 3.308:1. Final drive ratio = spur ÷ pinion × 3.308. With the stock 46T spur, a 12T pinion gives an FDR of 12.68 and a 19T gives 8.01.
How many teeth is the stock spur gear on the SWORKz S35-3E?
46 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 600 cst
- Rear
- 500 cst
- Front
- 6 x 1.3mm #330562A →
- Rear
- 6 x 1.4mm #330563A →
- Front
- 7,000 cst
- Center
- 7,000 cst
- Rear
- 3,000 cst
What shock oil does the SWORKz S35-3E come with?
Out of the box the S35-3E runs 600 cst front, 500 cst rear (SWORKz oil), on 6 x 1.3mm (#330562A) front, 6 x 1.4mm (#330563A) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the SWORKz S35-3E come with?
The kit springs are 75mm A-1 Yellow 1.4x6.5 (#115106) front, 90mm Red B-1 1.4x7.5 (#115108) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
What diff fluid does the SWORKz S35-3E come with?
The kit diff fluid is 7,000 cst front, 7,000 cst center, 3,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.
Setup Help
All 1/8 Off-Road Cars →
Free to start · iOS & Android
Setup App & Race Log
Your SWORKz S35-3E is in the RC Setup App
Save every setup change you make to your SWORKz S35-3E, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
