Setups
Have a setup for the S35-4 EVO?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the SWORKz S35-4 EVO, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 12T | 3.92 | 12.96 |
| 13T | 3.62 | 11.96 |
| 14T | 3.36 | 11.11 |
| 15T | 3.13 | 10.37 |
| 16T | 2.94 | 9.72 |
| 17T | 2.76 | 9.15 |
| 18T | 2.61 | 8.64 |
| 19T | 2.47 | 8.18 |
Shaded rows are the pinions most 1/8 4WD buggy setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the SWORKz S35-4 EVO, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the SWORKz S35-4 EVO?
It depends on your motor and the track. In the 1/8 4WD buggy class, racers gear by final drive ratio: 1800–2300 kV near 10.06. On the S35-4 EVO's stock 47T spur that is about 15T for 1800–2300 kV. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the S35-4 EVO selected.
What is the internal ratio (transmission ratio) of the SWORKz S35-4 EVO?
The S35-4 EVO has an internal ratio of 3.308:1. Final drive ratio = spur ÷ pinion × 3.308. With the stock 47T spur, a 12T pinion gives an FDR of 12.96 and a 19T gives 8.18.
How many teeth is the stock spur gear on the SWORKz S35-4 EVO?
47 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup (High grip). Part numbers link to AMain.
- Front
- 600 cst
- Rear
- 600 cst
- Front
- 8 x 1.2mm #228016-1.2-8 →
- Rear
- 8 x 1.3mm #228016-1.3-8 →
What shock oil does the SWORKz S35-4 EVO come with?
Out of the box the S35-4 EVO runs 600 cst front, 600 cst rear (SWORKz oil), on 8 x 1.2mm (#228016-1.2-8) front, 8 x 1.3mm (#228016-1.3-8) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the SWORKz S35-4 EVO come with?
The kit springs are 62mm US-4 dot 1.6x7.50 (#115182) front, 80mm RM3-dot (#115191) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Setup Help
All 1/8 Off-Road Cars →
Free to start · iOS & Android
Setup App & Race Log
Your SWORKz S35-4 EVO is in the RC Setup App
Save every setup change you make to your SWORKz S35-4 EVO, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
