Ask Miles, our Setup AI that’s been trained on the RC12 R8.
Stock gearing for the Team Associated RC12 R8, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR | Rollout |
|---|---|---|---|
| 22T | 3.00 | 3.00 | 42.5 mm |
| 23T | 2.87 | 2.87 | 44.4 mm |
| 24T | 2.75 | 2.75 | 46.4 mm |
| 25T | 2.64 | 2.64 | 48.3 mm |
| 26T | 2.54 | 2.54 | 50.2 mm |
| 27T | 2.44 | 2.44 | 52.2 mm |
| 28T | 2.36 | 2.36 | 54.1 mm |
| 29T | 2.28 | 2.28 | 56.0 mm |
| 30T | 2.20 | 2.20 | 58.0 mm |
| 31T | 2.13 | 2.13 | 59.9 mm |
| 32T | 2.06 | 2.06 | 61.8 mm |
| 33T | 2.00 | 2.00 | 63.8 mm |
| 34T | 1.94 | 1.94 | 65.7 mm |
| 35T | 1.89 | 1.89 | 67.6 mm |
| 36T | 1.83 | 1.83 | 69.6 mm |
| 37T | 1.78 | 1.78 | 71.5 mm |
| 38T | 1.74 | 1.74 | 73.4 mm |
| 39T | 1.69 | 1.69 | 75.4 mm |
| 40T | 1.65 | 1.65 | 77.3 mm |
| 41T | 1.61 | 1.61 | 79.2 mm |
| 42T | 1.57 | 1.57 | 81.2 mm |
| 43T | 1.53 | 1.53 | 83.1 mm |
| 44T | 1.50 | 1.50 | 85.0 mm |
| 45T | 1.47 | 1.47 | 87.0 mm |
| 46T | 1.43 | 1.43 | 88.9 mm |
| 47T | 1.40 | 1.40 | 90.8 mm |
| 48T | 1.38 | 1.38 | 92.8 mm |
| 49T | 1.35 | 1.35 | 94.7 mm |
| 50T | 1.32 | 1.32 | 96.6 mm |
| 51T | 1.29 | 1.29 | 98.6 mm |
| 52T | 1.27 | 1.27 | 100.5 mm |
| 53T | 1.25 | 1.25 | 102.4 mm |
| 54T | 1.22 | 1.22 | 104.4 mm |
| 55T | 1.20 | 1.20 | 106.3 mm |
| 56T | 1.18 | 1.18 | 108.2 mm |
Shaded rows are the pinions most 1/12 2WD gp setups run on the stock spur. Rollout at a 40.6 mm tire.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Team Associated RC12 R8, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain → (opens in new tab)It depends on your motor and the track. In the 1/12 2WD gp class, racers gear by final drive ratio: 6T and below near 3.67, 7.5–8.5T near 2.59, 13.5T near 1.72, 17.5T near 1.44. On the RC12 R8's stock 66T spur that is about 18T for 6T and below, 25T for 7.5–8.5T, 38T for 13.5T, 46T for 17.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the RC12 R8 selected.
The RC12 R8 has an internal ratio of 1:1. Final drive ratio = spur ÷ pinion × 1. With the stock 66T spur, a 22T pinion gives an FDR of 3.00 and a 56T gives 1.18.
66 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit shock setup. Part numbers link to AMain.
Out of the box the RC12 R8 runs 15,000 side tubes. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
The kit springs are 1.9lb White (#4852) front, 2.5lb White (#4852) side. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Free to start · iOS & Android
Your Team Associated RC12 R8 is in the RC Setup App
Save every setup change you make to your Team Associated RC12 R8, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

