ET48 2.2

Tekno ET48 2.2 Setups

Off-roadTruck1/8 scale4WD

RC Deal Alerts

Get notified when the RC stuff you want goes on sale

Set alerts

Setups

Get ET48 2.2 alerts
Wesley Knapp
Wesley Knapp
My Base Setup
1
3
Track
RC Madness
Outdoor Loose/loamy
Low/Medium grip
Date
Oct 10, 2025

Have a setup for the ET48 2.2?

Share your setup sheet with the community — we'll fill in the details automatically.

Submit a setup →

Gearing

Stock gearing for the Tekno ET48 2.2, with common pinions and their ratios.

Stock spur
44T
Internal ratio
4.444:1
Typical pinion
1800–2300 kV ≈ 14T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
12T3.6716.29
13T3.3815.04
14T3.1413.97
15T2.9313.04
16T2.7512.22
17T2.5911.50
18T2.4410.86

Shaded rows are the pinions most 1/8 4WD truck setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the Tekno ET48 2.2, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain →

What pinion gear should I use on the Tekno ET48 2.2?

It depends on your motor and the track. In the 1/8 4WD truck class, racers gear by final drive ratio: 1800–2300 kV near 13.97. On the ET48 2.2's stock 44T spur that is about 14T for 1800–2300 kV. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the ET48 2.2 selected.

What is the internal ratio (transmission ratio) of the Tekno ET48 2.2?

The ET48 2.2 has an internal ratio of 4.444:1. Final drive ratio = spur ÷ pinion × 4.444. With the stock 44T spur, a 12T pinion gives an FDR of 16.29 and a 18T gives 10.86.

How many teeth is the stock spur gear on the Tekno ET48 2.2?

44 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Shock oil
Front
550 cst
Rear
650 cst
Tekno oil
Springs
Front
4.8lb Pink #6090
Rear
4.8lb Pink #6090
Pistons
Front
6x1.2mm #6136
Rear
6x1.3mm #6137
Diff fluid
Front
10,000 cst
Center
10,000 cst
Rear
5,000 cst

What shock oil does the Tekno ET48 2.2 come with?

Out of the box the ET48 2.2 runs 550 cst front, 650 cst rear (Tekno oil), on 6x1.2mm (#6136) front, 6x1.3mm (#6137) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the Tekno ET48 2.2 come with?

The kit springs are 4.8lb Pink (#6090) front, 4.8lb Pink (#6090) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

What diff fluid does the Tekno ET48 2.2 come with?

The kit diff fluid is 10,000 cst front, 10,000 cst center, 5,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.

RC Setup App icon

Free to start · iOS & Android

Setup App & Race Log

Your Tekno ET48 2.2 is in the RC Setup App

Save every setup change you make to your Tekno ET48 2.2, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use