SCT410

Tekno SCT410 Setups

Off-roadShort Course Truck1/10 scale4WD

Setups

Get SCT410 alerts
Cowpker4life
Outdoor
1
Track
Unknown Track
Outdoor Hard-Packed
Low grip
Date
Dec 29, 2020

Have a setup for the SCT410?

Share your setup sheet with the community — we'll fill in the details automatically.

Submit a setup →

Gearing

Stock gearing for the Tekno SCT410, with common pinions and their ratios.

Stock spur
44T
Internal ratio
4:1
Typical pinion
4000 Kv+ ≈ 16T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
13T3.3813.54
14T3.1412.57
15T2.9311.73
16T2.7511.00
17T2.5910.35
18T2.449.78
19T2.329.26
20T2.208.80

Shaded rows are the pinions most 1/10 4WD short course truck setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the Tekno SCT410, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain →

What pinion gear should I use on the Tekno SCT410?

It depends on your motor and the track. In the 1/10 4WD short course truck class, racers gear by final drive ratio: 4000 Kv and up near 11.00. On the SCT410's stock 44T spur that is about 16T for 4000 Kv and up. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the SCT410 selected.

What is the internal ratio (transmission ratio) of the Tekno SCT410?

The SCT410 has an internal ratio of 4:1. Final drive ratio = spur ÷ pinion × 4. With the stock 44T spur, a 13T pinion gives an FDR of 13.54 and a 20T gives 8.80.

How many teeth is the stock spur gear on the Tekno SCT410?

44 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Shock oil
Front
450 cst
Rear
350 cst
Tekno oil
Springs
Front
Black #6048
Rear
Pink #6030
Pistons
Front
10 x 1.2mm #6008
Rear
10 x 1.2mm #6008
Diff fluid
Front
7,000 cst
Center
7,000 cst
Rear
5,000 cst

What shock oil does the Tekno SCT410 come with?

Out of the box the SCT410 runs 450 cst front, 350 cst rear (Tekno oil), on 10 x 1.2mm (#6008) front, 10 x 1.2mm (#6008) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the Tekno SCT410 come with?

The kit springs are Black (#6048) front, Pink (#6030) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

What diff fluid does the Tekno SCT410 come with?

The kit diff fluid is 7,000 cst front, 7,000 cst center, 5,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.

RC Setup App icon

Free to start · iOS & Android

Setup App & Race Log

Your Tekno SCT410 is in the RC Setup App

Save every setup change you make to your Tekno SCT410, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use