Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the SBX4E?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the WIRC SBX4E, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 12T | 3.83 | 12.98 |
| 13T | 3.54 | 11.98 |
| 14T | 3.29 | 11.12 |
| 15T | 3.07 | 10.38 |
| 16T | 2.88 | 9.73 |
| 17T | 2.71 | 9.16 |
| 18T | 2.56 | 8.65 |
| 19T | 2.42 | 8.20 |
Shaded rows are the pinions most 1/8 4WD buggy setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the WIRC SBX4E, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the WIRC SBX4E?
It depends on your motor and the track. In the 1/8 4WD buggy class, racers gear by final drive ratio: 1800–2300 kV near 10.06. On the SBX4E's stock 46T spur that is about 15T for 1800–2300 kV. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the SBX4E selected.
What is the internal ratio (transmission ratio) of the WIRC SBX4E?
The SBX4E has an internal ratio of 3.385:1. Final drive ratio = spur ÷ pinion × 3.385. With the stock 46T spur, a 12T pinion gives an FDR of 12.98 and a 19T gives 8.20.
How many teeth is the stock spur gear on the WIRC SBX4E?
46 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 600 cst
- Rear
- 600 cst
- Front
- 8 x 1.2mm
- Rear
- 8 x 1.3mm
- Front
- 5,000 cst
- Center
- 5,000 cst
- Rear
- 5,000 cst
What shock oil does the WIRC SBX4E come with?
Out of the box the SBX4E runs 600 cst front, 600 cst rear (P-ONE oil), on 8 x 1.2mm front, 8 x 1.3mm rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the WIRC SBX4E come with?
The kit springs are Medium black (#100125) front, Medium black (#100126) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
What diff fluid does the WIRC SBX4E come with?
The kit diff fluid is 5,000 cst front, 5,000 cst center, 5,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.
Setup Help
All 1/8 Off-Road Cars →
Free to start · iOS & Android
Setup App & Race Log
Your WIRC SBX4E is in the RC Setup App
Save every setup change you make to your WIRC SBX4E, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
