The racer asked
Astro set up
Miles, So Dialed's RC setup AI
I'm reading "Astro" as an astroturf track. The material has no 1/8 astroturf setup for the SBX4E, so these are the closest starting points, and the first two come from other scales or classes.
- Ride height: The 1/8 4WD buggy baseline is 23 mm front and 26 mm rear, but that is for dirt/clay. The 1/10 4WD buggy astroturf baseline is 17 mm front and rear, so astro runs lower than dirt in that scale. Start a little lower than the 1/8 dirt numbers and adjust from there.
- Camber: The 1/8 4WD buggy baseline is -3 degrees front and -2 degrees rear. The 1/10 astroturf baseline is -2 degrees on both ends.
- Toe: Front -1 degree (toe-out) and rear +3 degrees (toe-in), the same across the buggy baselines.
- Anti-squat: 1 degree for the 1/8 buggy baseline.
- Tires: Schumacher Stagger Rib in yellow for the front and Schumacher Mini Pin in yellow for the rear are made for dry astroturf. Astro is high grip, so tire choice shifts the balance quickly.
Watch the balance. If the car pushes on corner entry, soften the front tire compound or lower front ride height. If it gets loose on throttle exit, firmer front tires help. Let me know whether the astro is dry or damp, and whether the car pushes or gets loose, and I can narrow these down.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
