The racer asked
spin on corner entry TLR 22X-T on carpet
Miles, So Dialed's RC setup AI
Spin on corner entry is oversteer: the rear steps out as you brake into the turn. To calm it, shift grip off the front or onto the rear. The most effective first change is the front anti-roll bar.
A stiffer front bar takes grip away from the front, so the car turns in less aggressively. A lighter rear bar lets the rear keep its grip under braking and turn-in. Change one thing at a time so you can tell what helped.
- Front anti-roll bar: stiffen. Carpet racers on this car ran 1.5 to 1.9 mm, so step up toward 1.7 mm and test.
- Rear anti-roll bar: lighten. Carpet racers ran 1.4 mm.
- Front shock springs: stiffen. The kit front spring is 4.19lb Green (#TLR-1207). Carpet racers ran 4.75lb Purple (#TLR-1203) up front.
- Front shock oil: thicken. The kit is 35 wt, and carpet racers ran 45 wt up front.
Watch for the trade-off. Too much front stiffening makes the car push on mid-corner and exit, so if it turns in well but pushes wide later, back off the change. If the spin also happens on throttle, the rear is the issue, and softer rear tires or a bit more rear toe-in are the next things to check.
I can't see your car, so I'm assuming the kit setup. If you tell me your current front and rear anti-roll bar and spring settings, and whether the spin happens under braking or on throttle, I can narrow it down.
Miles
A spin on corner entry means the rear is stepping out, so the car is too loose. Move it toward understeer by stiffening the front or softening the rear, one change at a time. Start with the front shock oil, since it's the simplest change to make.
- Front shock oil: go from the kit 35 wt to 45 wt. Other carpet racers on this car ran 45 wt up front and 37.5 to 40 wt in the rear. Heavier front oil slows front damping and keeps the rear from rotating the car as it turns in.
- Front anti-roll bar: if the spin continues, stiffen it from the kit to 1.5 mm, then 1.9 mm. Carpet racers ran 1.5 to 1.9 mm up front, with the rear at 1.4 mm. A stiffer front bar reduces front grip, which pushes the car toward understeer.
- Front spring: if you need more, step from the kit 4.19lb Green to the 4.45lb Blue or 4.75lb Purple.
Watch for overshooting. Too much front grip loss will make the car push wide on entry. If it does, back off the last change before adding anything else. Also check whether the spin happens under braking or after you're already turned in, since braking points to a different fix.
I can't see your car, so I'm assuming kit settings. If you tell me your current front oil, anti-roll bar, and whether the spin happens under braking or mid-corner, I can narrow it down. The RC Setup App can also check your own numbers.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22X-T questions
How do I fix push on corner entry with a TLR 22X-T on carpet?
Push on corner entry means the front tires are losing grip before the rear, so the car washes wide. The fastest fix is to soften the front end and firm the rear, which moves grip...
How do I get help with TLR 22X-T setup sheets?
I can't open files, photos, or setup sheets here, so I can't read what you've got. Type out the settings you can read off the car or sheet, such as front and rear camber, ride...
What gear ratio should I run on a TLR 22X-T for an outdoor clay track?
There isn’t one gear ratio that suits every outdoor clay track. For the TLR 22X-T, the internal ratio is 2.6, but the right pinion depends mainly on your motor and the track...
