The racer asked
push on corner entry TLR 22X-T on carpet
Miles, So Dialed's RC setup AI
Push on corner entry means the front tires are losing grip before the rear, so the car washes wide. The fastest fix is to soften the front end and firm the rear, which moves grip toward the front. I can't see your current setup, so these steps assume the kit setup.
- Front anti-roll bar: go softer. The kit front bar size isn't in my data, so step down one size from what you run. Carpet racers here ran 1.5 mm to 1.9 mm up front.
- Rear anti-roll bar: go stiffer, to 1.4 mm, the size carpet racers ran in the back. A stiffer rear bar takes grip off the rear, which helps the front bite on turn-in.
- Front shock spring: go lighter, from the kit 4.19lb Green to the 3.95lb Yellow.
- Rear shock spring: go stiffer, from the kit 2.10lb Yellow to the 2.22lb Green.
Change one item at a time and run a few laps between changes. Start with the anti-roll bars, since they have the most effect on this car. If the car starts snapping loose mid-corner or on throttle, back off the rear bar first. If the push stays after the bars and springs, lighten front shock oil or use a lower front ride height next.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22X-T questions
Why does my TLR 22X-T spin on corner entry on carpet?
Spin on corner entry is oversteer: the rear steps out as you brake into the turn. To calm it, shift grip off the front or onto the rear. The most effective first change is the...
How do I get help with TLR 22X-T setup sheets?
I can't open files, photos, or setup sheets here, so I can't read what you've got. Type out the settings you can read off the car or sheet, such as front and rear camber, ride...
What gear ratio should I run on a TLR 22X-T for an outdoor clay track?
There isn’t one gear ratio that suits every outdoor clay track. For the TLR 22X-T, the internal ratio is 2.6, but the right pinion depends mainly on your motor and the track...
