The racer asked
What's a good diff weight for a clay track with stock tiers
Miles, So Dialed's RC setup AI
Keep the kit differential fluid at 3,000 cst for your first clay run. I have no clay-specific diff weight on record for this car, so that is the starting point I'd use.
Diff fluid sets how freely the rear wheels turn apart on corner exit, so it changes how the car drives off the corner:
- Diff fluid: go lighter if the car is loose on corner exit. Lighter fluid is listed as the fix for a loose exit.
- Diff fluid: go heavier if the car pushes on entry or tightens up on exit. Heavier fluid is the direction that helps a push.
Clay usually has enough bite that the kit 3,000 cst is a sensible place to start. Change one thing at a time, and only after you have checked the rest of the car on track.
- Make one step at a time, such as 3,000 to 4,000 cst or 3,000 to 2,000 cst, then run a few laps before judging it.
- The only public setup for this car used 1,000 cst, but it was run on loamy dirt, not clay, so it does not tell you much about clay.
What is the car doing on clay: pushing wide on entry, loose on exit, or tight in the middle of the corner? Tell me and I can narrow the direction.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22S Dirt Late Model questions
Why does my TLR 22S Dirt Late Model step out as soon as I apply throttle?
Stepping out as soon as you get on the throttle means the rear is breaking loose on corner exit. The fastest fix is to make the diff freer, which lets the rear wheels share the...
What is a good setup for a TLR 22S Dirt Late Model on a dirt oval?
The class starting point for a 1/10 late model on rubber tires is 15mm front and 21mm rear ride height, -3 camber on the right front and -1 on the left front, and 5 degrees of...
Best suspension setup for TLR 22S Dirt Late Model on tacky clay?
On tacky clay, start with medium springs and keep the chassis flat, rather than the soft springs you'd use on dry, low-grip dirt. Clay has plenty of bite, so the main risk is the...
Why is my TLR 22S Dirt Late Model loose coming out of turns?
Loose coming off the turn means the rear is stepping out under throttle, so you want more rear grip on power. Assuming the kit setup, start with the right-rear spring, since a...
What shock oil weight for TLR 22S Dirt Late Model on a medium-bite track?
For a medium-bite track, I don't have a specific oil weight for this car, so start with the kit setup: 30 weight in the front and 35 in the rear. Change one end at a time, based...
What differential fluid should I use in a TLR 22S Dirt Late Model?
The kit diff fluid for the TLR 22S Dirt Late Model is 3,000 cst. Start there and change it one step at a time. Lighter fluid lets the diff open more, which frees the car and makes...
