The racer asked
best suspension tuning for clay oval tracks
Miles, So Dialed's RC setup AI
On tacky clay, start with medium springs and keep the chassis flat, rather than the soft springs you'd use on dry, low-grip dirt. Clay has plenty of bite, so the main risk is the car rolling over its tires and losing even loading.
- Shock springs: Stay with medium rates. If the car rolls too much mid-corner, move to a stiffer spring at that corner. If it has no side bite, go softer.
- Shock oil: The kit is 30 weight front and 35 weight rear. Heavier oil slows roll and calms the car, so go heavier if it rolls, and lighter if it is slow to react.
The class baseline for a 1/10 Late Model on rubber tires, which is the typical starting point for this class, is:
- Ride height: 15mm front, 21mm rear
- Camber: RF -3, LF -1, LR +2, RR -2 degrees
- Front toe: -0.5 degrees (toe-out)
- Caster: 5 degrees front
Once the car is set up, adjust one thing at a time. If it pushes on corner entry, soften the right-front spring or add a little front toe-out. If it is loose on exit, add right-rear toe-in.
Watch for stiffer springs that make the car bind or lose side bite if you overdo them. No public setup for this car has been run on clay, so these numbers are class starting points, not tested clay values. If you tell me what the car does (pushing, loose, or rolling) and how grippy the track is, I can narrow it down.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22S Dirt Late Model questions
Why does my TLR 22S Dirt Late Model step out as soon as I apply throttle?
Stepping out as soon as you get on the throttle means the rear is breaking loose on corner exit. The fastest fix is to make the diff freer, which lets the rear wheels share the...
What is a good setup for a TLR 22S Dirt Late Model on a dirt oval?
The class starting point for a 1/10 late model on rubber tires is 15mm front and 21mm rear ride height, -3 camber on the right front and -1 on the left front, and 5 degrees of...
Why is my TLR 22S Dirt Late Model loose coming out of turns?
Loose coming off the turn means the rear is stepping out under throttle, so you want more rear grip on power. Assuming the kit setup, start with the right-rear spring, since a...
What shock oil weight for TLR 22S Dirt Late Model on a medium-bite track?
For a medium-bite track, I don't have a specific oil weight for this car, so start with the kit setup: 30 weight in the front and 35 in the rear. Change one end at a time, based...
What differential fluid should I use in a TLR 22S Dirt Late Model?
The kit diff fluid for the TLR 22S Dirt Late Model is 3,000 cst. Start there and change it one step at a time. Lighter fluid lets the diff open more, which frees the car and makes...
What gearing should I run on a TLR 22S Dirt Late Model for a medium clay oval?
For a medium-size clay oval, start with a 19-tooth pinion and the stock 84-tooth spur. Assuming the kit’s 3300 Kv motor and standard rubber tires, that gives a 10.74:1 final drive...
