The racer asked
Loose coming out of turn
Miles, So Dialed's RC setup AI
Loose coming off the turn means the rear is stepping out under throttle, so you want more rear grip on power. Assuming the kit setup, start with the right-rear spring, since a softer right-rear spring adds forward bite on exit.
- Right-rear spring: move softer than the kit 6lb Orange (#LOS-1885). Stiffer right-rear reduces bite and can snap the car loose.
- Differential fluid: lighten it from the kit 3,000 cst toward 2,000 cst. Lighter fluid lets the rear wheels work more independently on exit.
- Rear right toe: add toe-in on the right rear. This gives more forward drive and reduces snap over-rotation on throttle. Too much makes the car lazy mid-corner, so go in small steps.
- Front toe: add a little toe-out, from the kit -1 degree toward -1.5 degrees. This helps the car point toward the exit.
- Anti-squat: use less anti-squat if the car still feels loose. Changing the C or D block inserts is the way to do it.
Change one thing at a time and make a run or two before the next change. Softening the right-rear spring is usually the first step, and it is the one that most directly targets exit looseness.
Tell me your track grip and whether the loose feeling is at the top of the corner or the bottom, since that decides whether rear grip or front rotation is the bigger lever.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22S Dirt Late Model questions
Why does my TLR 22S Dirt Late Model step out as soon as I apply throttle?
Stepping out as soon as you get on the throttle means the rear is breaking loose on corner exit. The fastest fix is to make the diff freer, which lets the rear wheels share the...
What is a good setup for a TLR 22S Dirt Late Model on a dirt oval?
The class starting point for a 1/10 late model on rubber tires is 15mm front and 21mm rear ride height, -3 camber on the right front and -1 on the left front, and 5 degrees of...
Best suspension setup for TLR 22S Dirt Late Model on tacky clay?
On tacky clay, start with medium springs and keep the chassis flat, rather than the soft springs you'd use on dry, low-grip dirt. Clay has plenty of bite, so the main risk is the...
What shock oil weight for TLR 22S Dirt Late Model on a medium-bite track?
For a medium-bite track, I don't have a specific oil weight for this car, so start with the kit setup: 30 weight in the front and 35 in the rear. Change one end at a time, based...
What differential fluid should I use in a TLR 22S Dirt Late Model?
The kit diff fluid for the TLR 22S Dirt Late Model is 3,000 cst. Start there and change it one step at a time. Lighter fluid lets the diff open more, which frees the car and makes...
What gearing should I run on a TLR 22S Dirt Late Model for a medium clay oval?
For a medium-size clay oval, start with a 19-tooth pinion and the stock 84-tooth spur. Assuming the kit’s 3300 Kv motor and standard rubber tires, that gives a 10.74:1 final drive...
