The racer asked
What is a good set up losi late .odle dirt ovel
Miles, So Dialed's RC setup AI
The class starting point for a 1/10 late model on rubber tires is 15mm front and 21mm rear ride height, -3 camber on the right front and -1 on the left front, and 5 degrees of front caster. This is the typical starting value for that class, so it's a good place to begin on your TLR 22S.
- Ride height: front 15mm, rear 21mm
- Camber: RF -3, LF -1, LR +2, RR -2
- Front toe: 0.5 degrees out (the kit is 1 degree out)
- Caster: 5 degrees front
- Kick-up: 30 degrees
- Weight: 55% rear, 55% left, 52% wedge
The kit setup is about a degree more toe-out and has much less right-front camber, so these numbers will make the front bite harder on entry. Start with the class numbers, then check ride height last, since any change to the car shifts it.
One racer on loose, loamy outdoor dirt ran 20 weight shock oil front and rear (the kit is 30 front and 35 rear) with 1,000 cst diff fluid and -1.5 degrees front toe. Thinner oil and lighter diff suit loose dirt, but on a tacky or high-grip surface, stay closer to the kit oil.
Change one thing at a time and run a few laps before the next change. If the car pushes on corner entry, reduce front toe-out or soften the right-front spring. If it's loose on exit, add rear toe-in on the right rear or lower the rear ride height slightly.
What is the track surface like (loose, tacky, or high grip), and how does the car behave now: pushing, loose, or bottoming out?
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22S Dirt Late Model questions
Why does my TLR 22S Dirt Late Model step out as soon as I apply throttle?
Stepping out as soon as you get on the throttle means the rear is breaking loose on corner exit. The fastest fix is to make the diff freer, which lets the rear wheels share the...
Best suspension setup for TLR 22S Dirt Late Model on tacky clay?
On tacky clay, start with medium springs and keep the chassis flat, rather than the soft springs you'd use on dry, low-grip dirt. Clay has plenty of bite, so the main risk is the...
Why is my TLR 22S Dirt Late Model loose coming out of turns?
Loose coming off the turn means the rear is stepping out under throttle, so you want more rear grip on power. Assuming the kit setup, start with the right-rear spring, since a...
What shock oil weight for TLR 22S Dirt Late Model on a medium-bite track?
For a medium-bite track, I don't have a specific oil weight for this car, so start with the kit setup: 30 weight in the front and 35 in the rear. Change one end at a time, based...
What differential fluid should I use in a TLR 22S Dirt Late Model?
The kit diff fluid for the TLR 22S Dirt Late Model is 3,000 cst. Start there and change it one step at a time. Lighter fluid lets the diff open more, which frees the car and makes...
What gearing should I run on a TLR 22S Dirt Late Model for a medium clay oval?
For a medium-size clay oval, start with a 19-tooth pinion and the stock 84-tooth spur. Assuming the kit’s 3300 Kv motor and standard rubber tires, that gives a 10.74:1 final drive...
