The racer asked
shock positions
Miles, So Dialed's RC setup AI
The Rustler's kit shock positions are front shock arm mounting hole = Outside and rear shock arm mounting hole = Middle. Both change shock angle, which is the main handling effect of moving them.
- Front shock arm mounting hole: kit Outside. The other option is Inside.
- Rear shock arm mounting hole: kit Middle. The other options are Inside and Outside.
- Front and rear towers: the kit towers (#3639 front, #3638 rear) are the only standard options, so shock angle changes come from the arm holes.
To reduce understeer (push), angle the shocks outward at the front tower and inward at the rear tower. To reduce oversteer (looseness), do the reverse: inward at the front tower and outward at the rear tower. Shock angle also affects how the car behaves on bumps and jumps. Inward at the towers, or outward at the arm, helps stability over bumps. Outward at the towers helps reduce bottoming on jumps.
Change one end at a time and test a single lap set before moving the other. If you tell me whether your car pushes or feels loose on corner entry or exit, I can narrow down which end to change.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
