Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the EXECUTE XQ11R/RR/HR?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Xpress EXECUTE XQ11R/RR/HR, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 20T | 5.50 | 10.45 |
| 21T | 5.24 | 9.95 |
| 22T | 5.00 | 9.50 |
| 23T | 4.78 | 9.09 |
| 24T | 4.58 | 8.71 |
| 25T | 4.40 | 8.36 |
| 26T | 4.23 | 8.04 |
| 27T | 4.07 | 7.74 |
| 28T | 3.93 | 7.46 |
| 29T | 3.79 | 7.21 |
| 30T | 3.67 | 6.97 |
| 31T | 3.55 | 6.74 |
| 32T | 3.44 | 6.53 |
| 33T | 3.33 | 6.33 |
| 34T | 3.24 | 6.15 |
| 35T | 3.14 | 5.97 |
| 36T | 3.06 | 5.81 |
| 37T | 2.97 | 5.65 |
| 38T | 2.89 | 5.50 |
| 39T | 2.82 | 5.36 |
| 40T | 2.75 | 5.22 |
| 41T | 2.68 | 5.10 |
| 42T | 2.62 | 4.98 |
| 43T | 2.56 | 4.86 |
| 44T | 2.50 | 4.75 |
| 45T | 2.44 | 4.64 |
| 46T | 2.39 | 4.54 |
| 47T | 2.34 | 4.45 |
| 48T | 2.29 | 4.35 |
| 49T | 2.24 | 4.27 |
| 50T | 2.20 | 4.18 |
| 51T | 2.16 | 4.10 |
| 52T | 2.12 | 4.02 |
Shaded rows are the pinions most 1/10 4WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Xpress EXECUTE XQ11R/RR/HR, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Xpress EXECUTE XQ11R/RR/HR?
It depends on your motor and the track. In the 1/10 4WD touring/gt class, racers gear by final drive ratio: 6T and below near 7.34, 13.5T near 4.51, 17.5T near 4.51, 21.5T and up near 3.65. On the EXECUTE XQ11R/RR/HR's stock 110T spur that is about 28T for 6T and below, 46T for 13.5T, 46T for 17.5T, 57T for 21.5T and up. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the EXECUTE XQ11R/RR/HR selected.
What is the internal ratio (transmission ratio) of the Xpress EXECUTE XQ11R/RR/HR?
The EXECUTE XQ11R/RR/HR has an internal ratio of 1.9:1. Final drive ratio = spur ÷ pinion × 1.9. With the stock 110T spur, a 20T pinion gives an FDR of 10.45 and a 52T gives 4.02.
How many teeth is the stock spur gear on the Xpress EXECUTE XQ11R/RR/HR?
110 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 450 cst
- Rear
- 450 cst
- Front
- 19N #XP11207 →
- Rear
- 19N #XP-11206 →
- Front
- 4-hole
- Rear
- 4-hole
What shock oil does the Xpress EXECUTE XQ11R/RR/HR come with?
Out of the box the EXECUTE XQ11R/RR/HR runs 450 cst front, 450 cst rear, on 4-hole front, 4-hole rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Xpress EXECUTE XQ11R/RR/HR come with?
The kit springs are 19N (#XP11207) front, 19N (#XP-11206) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Setup Help
All Touring Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Xpress EXECUTE XQ11R/RR/HR is in the RC Setup App
Save every setup change you make to your Xpress EXECUTE XQ11R/RR/HR, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
