Ask Miles, our Setup AI that’s been trained on the X4F '23.
X4F'23 - Hungarian nats. rd.6
X4F'23 - Mrc Longwy Winterseries Rd.4
X4F'23 - Saar-Pfalz-Cup R2
X4F'23 - GP3F Nr.18
X4F'23 - US Indoor Champs
X4F'23 - Swedish Indoor Nationals 2022
X4F'23 - Hungarian Nats. 1.rd.
X4F'23 - SPC Final Round
X4F'23 - DRCMU
X4F'23 - PRE USIC SETUP - BASELINE
X4F'23 - ETS R4 Luxembourg
X4F'23 - Dutch national Round 5
X4F'23 - German naionals
X4F'23 - Dutch Nationals Round 4
X4F'23 - 2022 Summer Slam
X4F'23 - X4F base setup / black carpet
X4F'23 - Luxembourgish nationals
X4F'23 - Az states warm-up race
X4F'23 - EC FWD 22 - StefanSchulz-Berlin
X4F'23 - Basic Asphalt
Stock gearing for the XRAY X4F '23, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 36T | 2.78 | 5.28 |
| 37T | 2.70 | 5.14 |
| 38T | 2.63 | 5.00 |
| 39T | 2.56 | 4.87 |
| 40T | 2.50 | 4.75 |
| 41T | 2.44 | 4.63 |
| 42T | 2.38 | 4.52 |
| 43T | 2.33 | 4.42 |
| 44T | 2.27 | 4.32 |
| 45T | 2.22 | 4.22 |
| 46T | 2.17 | 4.13 |
| 47T | 2.13 | 4.04 |
Shaded rows are the pinions most 1/10 FWD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the XRAY X4F '23, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain → (opens in new tab)It depends on your motor and the track. In the 1/10 FWD touring/gt class, racers gear by final drive ratio: 17.5T near 4.51. On the X4F '23's stock 100T spur that is about 42T for 17.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the X4F '23 selected.
The X4F '23 has an internal ratio of 1.9:1. Final drive ratio = spur ÷ pinion × 1.9. With the stock 100T spur, a 36T pinion gives an FDR of 5.28 and a 47T gives 4.04.
100 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit shock setup (Manual). Part numbers link to AMain.
Out of the box the X4F '23 runs 350 cst front, 350 cst rear, on 4 x 1.1mm (#308037) front, 4 x 1.1mm (#308037) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
The kit springs are 2.5-2.8 (#308264) front, 2.5 (#308275) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
The kit diff fluid is 500,000 cst front. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.
Free to start · iOS & Android
Your XRAY X4F '23 is in the RC Setup App
Save every setup change you make to your XRAY X4F '23, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

