Setups
Have a setup for the BD10/10LC?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Yokomo BD10/10LC, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 20T | 5.50 | 10.45 |
| 21T | 5.24 | 9.95 |
| 22T | 5.00 | 9.50 |
| 23T | 4.78 | 9.09 |
| 24T | 4.58 | 8.71 |
| 25T | 4.40 | 8.36 |
| 26T | 4.23 | 8.04 |
| 27T | 4.07 | 7.74 |
| 28T | 3.93 | 7.46 |
| 29T | 3.79 | 7.21 |
| 30T | 3.67 | 6.97 |
| 31T | 3.55 | 6.74 |
| 32T | 3.44 | 6.53 |
| 33T | 3.33 | 6.33 |
| 34T | 3.24 | 6.15 |
| 35T | 3.14 | 5.97 |
| 36T | 3.06 | 5.81 |
| 37T | 2.97 | 5.65 |
| 38T | 2.89 | 5.50 |
| 39T | 2.82 | 5.36 |
| 40T | 2.75 | 5.22 |
| 41T | 2.68 | 5.10 |
| 42T | 2.62 | 4.98 |
| 43T | 2.56 | 4.86 |
| 44T | 2.50 | 4.75 |
| 45T | 2.44 | 4.64 |
| 46T | 2.39 | 4.54 |
| 47T | 2.34 | 4.45 |
| 48T | 2.29 | 4.35 |
| 49T | 2.24 | 4.27 |
| 50T | 2.20 | 4.18 |
| 51T | 2.16 | 4.10 |
| 52T | 2.12 | 4.02 |
Shaded rows are the pinions most 1/10 4WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Yokomo BD10/10LC, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Yokomo BD10/10LC?
It depends on your motor and the track. In the 1/10 4WD touring/gt class, racers gear by final drive ratio: 6T and below near 7.34, 13.5T near 4.51, 17.5T near 4.51, 21.5T and up near 3.65. On the BD10/10LC's stock 110T spur that is about 28T for 6T and below, 46T for 13.5T, 46T for 17.5T, 57T for 21.5T and up. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the BD10/10LC selected.
What is the internal ratio (transmission ratio) of the Yokomo BD10/10LC?
The BD10/10LC has an internal ratio of 1.9:1. Final drive ratio = spur ÷ pinion × 1.9. With the stock 110T spur, a 20T pinion gives an FDR of 10.45 and a 52T gives 4.02.
How many teeth is the stock spur gear on the Yokomo BD10/10LC?
110 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 350 cst
- Rear
- 350 cst
- Front
- Prog 2.4-2.9 #B10-SSP24 →
- Rear
- Prog 2.45-2.75 3 stripe #B9-SSP245 →
- Front
- 4 x 1.1mm #B9-S114 →
- Rear
- 4 x 1.1mm #B9-S114 →
- Rear
- 7,500 cst
What shock oil does the Yokomo BD10/10LC come with?
Out of the box the BD10/10LC runs 350 cst front, 350 cst rear (Yokomo oil), on 4 x 1.1mm (#B9-S114) front, 4 x 1.1mm (#B9-S114) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Yokomo BD10/10LC come with?
The kit springs are Prog 2.4-2.9 (#B10-SSP24) front, Prog 2.45-2.75 3 stripe (#B9-SSP245) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
What diff fluid does the Yokomo BD10/10LC come with?
The kit diff fluid is 7,500 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.
Setup Help
All Touring Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Yokomo BD10/10LC is in the RC Setup App
Save every setup change you make to your Yokomo BD10/10LC, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
