Car Not Handling Right?
Diagnose understeer, oversteer, traction rolling and more — by symptom.
Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the MS1.0 FWD?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Yokomo MS1.0 FWD, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 36T | 2.78 | 5.28 |
| 37T | 2.70 | 5.14 |
| 38T | 2.63 | 5.00 |
| 39T | 2.56 | 4.87 |
| 40T | 2.50 | 4.75 |
| 41T | 2.44 | 4.63 |
| 42T | 2.38 | 4.52 |
| 43T | 2.33 | 4.42 |
| 44T | 2.27 | 4.32 |
| 45T | 2.22 | 4.22 |
| 46T | 2.17 | 4.13 |
| 47T | 2.13 | 4.04 |
Shaded rows are the pinions most 1/10 FWD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Yokomo MS1.0 FWD, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Yokomo MS1.0 FWD?
It depends on your motor and the track. In the 1/10 FWD touring/gt class, racers gear by final drive ratio: 17.5T near 4.51. On the MS1.0 FWD's stock 100T spur that is about 42T for 17.5T. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the MS1.0 FWD selected.
What is the internal ratio (transmission ratio) of the Yokomo MS1.0 FWD?
The MS1.0 FWD has an internal ratio of 1.9:1. Final drive ratio = spur ÷ pinion × 1.9. With the stock 100T spur, a 36T pinion gives an FDR of 5.28 and a 47T gives 4.04.
How many teeth is the stock spur gear on the Yokomo MS1.0 FWD?
100 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup (Manual). Part numbers link to AMain.
- Front
- 450 cst
- Rear
- 450 cst
- Front
- 2.0 Blue #MS-SSL200 →
- Rear
- 1.9 Red #MS-SSL190 →
- Front
- 6 x 1.1mm #B9-S116 →
- Rear
- 6 x 1.1mm #B9-S116 →
What shock oil does the Yokomo MS1.0 FWD come with?
Out of the box the MS1.0 FWD runs 450 cst front, 450 cst rear (Yokomo oil), on 6 x 1.1mm (#B9-S116) front, 6 x 1.1mm (#B9-S116) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Yokomo MS1.0 FWD come with?
The kit springs are 2.0 Blue (#MS-SSL200) front, 1.9 Red (#MS-SSL190) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Setup Help
All Touring Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Yokomo MS1.0 FWD is in the RC Setup App
Save every setup change you make to your Yokomo MS1.0 FWD, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
