Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the MS2.0?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Yokomo MS2.0, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 20T | 4.50 | 9.00 |
| 21T | 4.29 | 8.57 |
| 22T | 4.09 | 8.18 |
| 23T | 3.91 | 7.83 |
| 24T | 3.75 | 7.50 |
| 25T | 3.60 | 7.20 |
| 26T | 3.46 | 6.92 |
| 27T | 3.33 | 6.67 |
| 28T | 3.21 | 6.43 |
| 29T | 3.10 | 6.21 |
| 30T | 3.00 | 6.00 |
| 31T | 2.90 | 5.81 |
| 32T | 2.81 | 5.63 |
| 33T | 2.73 | 5.45 |
| 34T | 2.65 | 5.29 |
| 35T | 2.57 | 5.14 |
| 36T | 2.50 | 5.00 |
| 37T | 2.43 | 4.86 |
| 38T | 2.37 | 4.74 |
| 39T | 2.31 | 4.62 |
| 40T | 2.25 | 4.50 |
| 41T | 2.20 | 4.39 |
| 42T | 2.14 | 4.29 |
| 43T | 2.09 | 4.19 |
| 44T | 2.05 | 4.09 |
| 45T | 2.00 | 4.00 |
| 46T | 1.96 | 3.91 |
| 47T | 1.91 | 3.83 |
| 48T | 1.88 | 3.75 |
| 49T | 1.84 | 3.67 |
| 50T | 1.80 | 3.60 |
| 51T | 1.76 | 3.53 |
| 52T | 1.73 | 3.46 |
Shaded rows are the pinions most 1/10 4WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Yokomo MS2.0, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Yokomo MS2.0?
It depends on your motor and the track. In the 1/10 4WD touring/gt class, racers gear by final drive ratio: 6T and below near 7.34, 13.5T near 4.51, 17.5T near 4.51, 21.5T and up near 3.65. On the MS2.0's stock 90T spur that is about 25T for 6T and below, 40T for 13.5T, 40T for 17.5T, 49T for 21.5T and up. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the MS2.0 selected.
What is the internal ratio (transmission ratio) of the Yokomo MS2.0?
The MS2.0 has an internal ratio of 2:1. Final drive ratio = spur ÷ pinion × 2. With the stock 90T spur, a 20T pinion gives an FDR of 9.00 and a 52T gives 3.46.
How many teeth is the stock spur gear on the Yokomo MS2.0?
90 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 450 cst
- Rear
- 450 cst
- Front
- 2.4 Green #MS-SLS240 →
- Rear
- 2.5 Orange #MS-SLS250 →
- Front
- 6 x 1.1mm #MS-S116 →
- Rear
- 6 x 1.1mm #MS-S116 →
What shock oil does the Yokomo MS2.0 come with?
Out of the box the MS2.0 runs 450 cst front, 450 cst rear (Yokomo oil), on 6 x 1.1mm (#MS-S116) front, 6 x 1.1mm (#MS-S116) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Yokomo MS2.0 come with?
The kit springs are 2.4 Green (#MS-SLS240) front, 2.5 Orange (#MS-SLS250) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Setup Help
All Touring Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Yokomo MS2.0 is in the RC Setup App
Save every setup change you make to your Yokomo MS2.0, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
