What pinion gear should I run on a Schumacher Mi9 with a 13.5T motor?

Asked November 22, 2026

The racer asked

gearing, pinion

Miles, So Dialed's RC setup AI

For a 13.5T motor, the pick is a 29-tooth pinion on the stock 85-tooth spur, for a final drive ratio of 5.33. I assumed the 13.5T Hobbywing G4R, the motor most racers in the class run, so tell me your motor if it's different. Confidence is high.

Most racers in this class run pinions from 38 to 45 teeth, but they pair them with a bigger spur, typically 98 to 112 teeth. The 29T pick is for the stock spur, so the two numbers are not directly comparable. If you tell me the spur you run, I can recalculate for that combination.

  • Pinion: 29T, spur 85T (stock), final drive 5.33
  • Class range: 38T to 45T pinions, which go with larger spurs

Check motor temperature after a short run. If it runs too hot, go down one tooth on the pinion. Moving to a smaller pinion lowers the final drive ratio and makes the motor run cooler, at the cost of some top speed. Moving to a larger pinion does the opposite.

Recommender: https://www.sodialed.com/utilities/rc-pinion-recommender?car=schumacher-mi9

Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.

Have a question?

Get setup help from Miles, our RC Setup AI that’s been trained on this car.

Free, and your first answer needs no sign-in.

RC Setup App icon

Free to start · iOS & Android

Save this change in the RC Setup App

Track every change, get AI feedback that knows your exact setup. Racers have tracked 100,000+ setups.