What ride height for Team Associated RC10 T84 on clay tracks?

Asked November 8, 2026

The racer asked

Good right height for clay tracks

Miles, So Dialed's RC setup AI

A good starting ride height for the Team Associated RC10 T84 on a clay track is about 19 mm front and rear, measured with the car ready to run on a flat surface. The T84 kit setting lists 19 mm at the front, and 19 mm is also a dirt/clay baseline for off-road cars.

That height keeps the truck from sitting too high and leaning excessively in corners, while leaving some clearance for bumps. If the track is very smooth and the truck traction-rolls, try lowering it slightly. If it bottoms out or the clay is rough, raise it a little and test again.

Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.

Have a question?

Ask Miles, our RC Setup AI that’s been trained on the RC10 T84.

Free, and your first answer needs no sign-in.

RC Setup App icon

Free to start · iOS & Android

Save this change in the RC Setup App

Track every change, get AI feedback that knows your exact setup. Racers have tracked 100,000+ setups.