The racer asked
Rocket 5.1 set up for a high bite clay track
Miles, So Dialed's RC setup AI
Assuming dry, high-bite clay on the Rocket 5.1, start with X4 foam tires front and rear and the kit shock settings, then tune for a car that rolls too much or hooks suddenly. X4 is the firm end of Custom Works’ versatile X-series; use the softer X2 only if the car lacks grip.
- Shocks: Keep the kit baseline initially: 30-weight oil front and rear, with 6 lb rear springs. The Rocket 5 setup lists those rear springs and oil values; I don’t have a verified Rocket 5.1 high-bite recipe with exact replacement numbers.
- If the chassis rolls or traction-rolls: Lower ride height slightly, reduce droop, and move toward stiffer springs or heavier oil, one change at a time. Higher roll center and a thicker anti-roll bar can also calm excess roll.
- If tires wear quickly or grip is excessive on a black groove: Try the higher-rubber-content V series for durability.
Watch for the trade-off: too much stiffness or too little ride height can make the car skate or bottom out. If it starts pushing, soften the front-right spring or use a smaller right-front tire before changing several settings at once.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
