The racer asked
What’s a good setup for low grip Kyosho rcp track. Running 2500kv lipo, hybrid hardbody/lexan roof, windows and wings). Running 0F, 19mm diameter KS-M Firm, Rear 3R, 20mm Marka V15 Radial. 2mm ride height, what other things should I consider before hitting the track?
Miles, So Dialed's RC setup AI
For a low-grip RCP track, your 2 mm ride height is a sensible XB-SF baseline. Keep the rest of the setup unchanged for the first runs, then tune from what the car does rather than changing several things at once. The XB-SF kit lists 2 mm for both front and rear ride height.
- Tires: The low-grip starting recommendation for small-scale RCP is KS or KS-M at the front, with KS-M or KSK at the rear. Your KS-M Firm front is in the right compound family, but if the car pushes or lacks turn-in, try a softer front tire first. I can’t reliably rank the Marka V15 rear against those compounds, so judge it by rear grip on track.
- Offsets and clearance: Keep the 0F and 3R offsets consistent left to right. Check that the tires don’t rub the body or chassis through steering and suspension movement. With 19 mm front and 20 mm rear tires, measure ride height at both ends with the race body and battery installed.
- Body and electronics: Secure the hardbody/lexan sections, windows, and wings; check for rubbing and loose parts. Start with smooth throttle and conservative boost or turbo, if adjustable, until you know the grip level.
- Before the first run: Clean the tires, check steering return, free-rolling wheels, drivetrain, and battery security. Confirm tire-treatment rules at your track.
If it understeers, change front grip first; if the rear steps out, look for more rear grip. The tire guide notes that too much rear grip can also make the car traction-roll.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
