The racer asked
It loose in corner
Miles, So Dialed's RC setup AI
If the rear is sliding out, the car has too much rotation or not enough rear grip. First, add rear tire grip: try a softer rear compound, or a harder front compound, changing only one end at a time. That is a strong starting point for reducing looseness on an F1 pan car.
If it mainly happens as you turn in, reduce front toe-out a step. The F1-180-V5 kit setting is -1° front toe; try moving toward 0° for calmer entry steering.
If it happens mid-corner or on exit, tire balance is the better first test. Too much front grip or too little rear grip can make the rear step out. Softer rear tires may add grip, but can make the car feel less responsive.
When does it get loose: corner entry, mid-corner, or when you accelerate out?
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More F1-180-V5 questions
How can I make a Team Saxo F1-180-V5 easier to drive on carpet with foam tires?
For an easier-to-drive Team Saxo F1-180-V5 on carpet with foam tires, reduce front toe-out from the kit setting of -1° to -0.5°. It should calm the car and help it track...
How to make Team Saxo F1-180-V5 easier on asphalt with foam tyres?
For an easier, calmer asphalt setup on the Team Saxo F1-180-V5, make the front toe less pointed out, from the kit setting of -1° to -0.5°. That should soften the initial steering...
How can I make my Team Saxo F1-180-V5 easier to drive on asphalt?
For an easier-to-drive Team Saxo F1-180-V5 on asphalt, start by reducing the front toe-out from the kit setting of -1° toward 0°, in 0.5° steps. This calms turn-in and makes the...
