Ask Miles, our Setup AI that’s been trained on the TA07 PRO.
Stock gearing for the Tamiya TA07 PRO, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 20T | 3.20 | 6.56 |
| 21T | 3.05 | 6.25 |
| 22T | 2.91 | 5.96 |
| 23T | 2.78 | 5.70 |
| 24T | 2.67 | 5.47 |
| 25T | 2.56 | 5.25 |
| 26T | 2.46 | 5.05 |
| 27T | 2.37 | 4.86 |
| 28T | 2.29 | 4.69 |
| 29T | 2.21 | 4.52 |
| 30T | 2.13 | 4.37 |
| 31T | 2.06 | 4.23 |
| 32T | 2.00 | 4.10 |
| 33T | 1.94 | 3.98 |
| 34T | 1.88 | 3.86 |
| 35T | 1.83 | 3.75 |
| 36T | 1.78 | 3.64 |
| 37T | 1.73 | 3.55 |
| 38T | 1.68 | 3.45 |
| 39T | 1.64 | 3.36 |
| 40T | 1.60 | 3.28 |
| 41T | 1.56 | 3.20 |
| 42T | 1.52 | 3.12 |
| 43T | 1.49 | 3.05 |
| 44T | 1.45 | 2.98 |
| 45T | 1.42 | 2.92 |
| 46T | 1.39 | 2.85 |
| 47T | 1.36 | 2.79 |
| 48T | 1.33 | 2.73 |
| 49T | 1.31 | 2.68 |
| 50T | 1.28 | 2.62 |
| 51T | 1.25 | 2.57 |
| 52T | 1.23 | 2.52 |
Shaded rows are the pinions most 1/10 4WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Tamiya TA07 PRO, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain → (opens in new tab)It depends on your motor and the track. In the 1/10 4WD touring/gt class, racers gear by final drive ratio: 6T and below near 7.34, 13.5T near 4.51, 17.5T near 4.51, 21.5T and up near 3.65. On the TA07 PRO's stock 64T spur that is about 18T for 6T and below, 29T for 13.5T, 29T for 17.5T, 36T for 21.5T and up. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the TA07 PRO selected.
The TA07 PRO has an internal ratio of 2.05:1. Final drive ratio = spur ÷ pinion × 2.05. With the stock 64T spur, a 20T pinion gives an FDR of 6.56 and a 52T gives 2.52.
64 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit shock setup (Manual). Part numbers link to AMain.
Out of the box the TA07 PRO runs 400 cst front, 400 cst rear, on 3-hole front, 3-hole rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
The kit springs are Medium Yellow (#53440) front, Medium Yellow (#53440) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
Free to start · iOS & Android
Your Tamiya TA07 PRO is in the RC Setup App
Save every setup change you make to your Tamiya TA07 PRO, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

