BD12

Yokomo BD12

Q&A, setups, gearing, kit settings, manual, and guides

On-road•Touring/GT•1/10 scale•4WD

Ask Miles, our Setup AI that’s been trained on the BD12.

Setups

Get BD12 alerts

Gearing

Stock gearing for the Yokomo BD12, with common pinions and their ratios.

Stock spur
90T
Internal ratio
1.9:1
Typical pinion
≤6T ≈ 23T · 13.5T ≈ 38T · 17.5T ≈ 38T · 21.5T+ ≈ 47T
Class medians on the stock spur. For your motor and track →
PinionSpur ÷ pinionFDR
20T4.508.55
21T4.298.14
22T4.097.77
23T3.917.43
24T3.757.13
25T3.606.84
26T3.466.58
27T3.336.33
28T3.216.11
29T3.105.90
30T3.005.70
31T2.905.52
32T2.815.34
33T2.735.18
34T2.655.03
35T2.574.89
36T2.504.75
37T2.434.62
38T2.374.50
39T2.314.38
40T2.254.27
41T2.204.17
42T2.144.07
43T2.093.98
44T2.053.89
45T2.003.80
46T1.963.72
47T1.913.64
48T1.883.56
49T1.843.49
50T1.803.42
51T1.763.35
52T1.733.29

Shaded rows are the pinions most 1/10 4WD touring/gt setups run on the stock spur.

What pinion should I run?

Tell us your motor and track and get a starting pinion for the Yokomo BD12, with the range racers in the class run.

Get a recommendation →Shop pinion gears at AMain → (opens in new tab)

What pinion gear should I use on the Yokomo BD12?

It depends on your motor and the track. In the 1/10 4WD touring/gt class, racers gear by final drive ratio: 6T and below near 7.34, 13.5T near 4.51, 17.5T near 4.51, 21.5T and up near 3.65. On the BD12's stock 90T spur that is about 23T for 6T and below, 38T for 13.5T, 38T for 17.5T, 47T for 21.5T and up. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the BD12 selected.

What is the internal ratio (transmission ratio) of the Yokomo BD12?

The BD12 has an internal ratio of 1.9:1. Final drive ratio = spur ÷ pinion × 1.9. With the stock 90T spur, a 20T pinion gives an FDR of 8.55 and a 52T gives 3.29.

How many teeth is the stock spur gear on the Yokomo BD12?

90 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.

Kit setup

Kit shock setup. Part numbers link to AMain.

Shock oil
Front
450 cst
Rear
450 cst
Springs
Front
Linear 2.6 2 dot #B9-SLF260 →
Rear
Linear 2.7 3 dot #B9-SLF270 →
Pistons
Front
6 x 1.1mm #B9-S116 →
Rear
6 x 1.1mm #B9-S116 →

What shock oil does the Yokomo BD12 come with?

Out of the box the BD12 runs 450 cst front, 450 cst rear, on 6 x 1.1mm (#B9-S116) front, 6 x 1.1mm (#B9-S116) rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.

What springs does the Yokomo BD12 come with?

The kit springs are Linear 2.6 2 dot (#B9-SLF260) front, Linear 2.7 3 dot (#B9-SLF270) rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.

RC Setup App icon

Free to start · iOS & Android

RC Setup App

Your Yokomo BD12 is in the RC Setup App

Save every setup change you make to your Yokomo BD12, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.

  • Setup Tracking
  • AI Mechanic answers
  • Find & Share Setups
  • Race Log
  • Gear Ratio Calculator
  • Free to use