The racer asked
More setups
Miles, So Dialed's RC setup AI
Yes. There are other-driver setup references for the RC10 B84D across carpet, astroturf, hard-packed, and loose/loamy tracks. They’re setting examples rather than complete, ready-to-copy setup sheets.
- Medium-grip carpet: front toe appears at 0° or -1°; front shock oil entries range from 42.5 to 47.5 wt; rear ride height is 11 mm.
- High-grip astroturf: front toe is listed at +1°; front diff height at +1 mm; rear ride height at 12 mm.
- Medium hard-packed: front toe is 0°; front diff height is 0 mm; rear ride height is 17 mm.
- Low/medium loose-loamy: front toe is -1.5°; rear ride height is 17 mm; rear limiters are listed at 0/0 mm.
These are reference values from different drivers, not necessarily settings that were tested together. Tell me your track surface and grip level, and I can narrow the examples to a more relevant starting point.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RC10 B84/D questions
How do I get more grip on my RC10 B84/D at Tacoma RC Raceway?
Start with the tires: at a smooth, clean clay track, try a clay slick or ghost slick; if there’s dust on top, use a pin tire suited to dusty hardpack instead. The right tread and...
Team Associated RC10 B84/D gear chart?
For the RC10 B84D, the available model information lists 72T and 78T, 48-pitch center-differential spur gears, but it doesn’t provide a full pinion gear chart. Tell me your...
What spur gear size for Team Associated RC10 B84/D stock setup?
Use a 78-tooth spur gear for the RC10 B84/D’s basic stock setup. That is the kit setup default; the car also supports 72-, 75-, and 81-tooth spurs for gearing changes.
Which rear gearbox height should I use on a Team Associated RC10 B84/D?
Start with 0 mm, the kit default. It’s the safer baseline if you’re not sure; the setting changes rear differential height. Move to +2 mm for carpet or astroturf. B84/D racers...
What oil setup for Team Associated RC10 B84/D on low-grip indoor clay?
Assuming you mean shock and differential oils, use the B84/D kit values as your baseline, then go lighter in small steps if the car lacks grip. There isn’t a documented B84/D oil...
What ride height should I use on carpet for Team Associated RC10 B84/D?
For the RC10 B84/D, start at 11 mm front and rear on medium-grip carpet. On high-grip carpet, 12 mm front and rear is a good starting point; those are the carpet ride heights used...
