The racer asked
how do i get mre grip on my b7.1d at the tacoma rc raceway
Miles, So Dialed's RC setup AI
Start with the tires: at a smooth, clean clay track, try a clay slick or ghost slick; if there’s dust on top, use a pin tire suited to dusty hardpack instead. The right tread and compound depend on the track’s actual condition, which can change during the day.
If the tires are right but the buggy still lacks traction, make one change at a time:
- For more rear grip, try a little more rear toe-in or reduce anti-squat. Both can help the rear stay planted, though more toe-in can make the car feel less free in turns.
- For more front grip, first check that the front tires are clean and appropriate for the surface. If it still pushes, tell me whether it’s pushing on corner entry or mid-corner before changing the setup.
Soft compounds tend to help on packed, dusty surfaces, while harder compounds suit hot or abrasive tracks. If the car is traction-rolling rather than slipping, don’t chase more grip; use a harder tire compound or lower ride height instead. Is Tacoma’s track dusty or clean clay right now, and are you losing grip at the front or rear?
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RC10 B84/D questions
Are there more setup examples for the Team Associated RC10 B84/D?
Yes. There are other-driver setup references for the RC10 B84D across carpet, astroturf, hard-packed, and loose/loamy tracks. They’re setting examples rather than complete...
Team Associated RC10 B84/D gear chart?
For the RC10 B84D, the available model information lists 72T and 78T, 48-pitch center-differential spur gears, but it doesn’t provide a full pinion gear chart. Tell me your...
What spur gear size for Team Associated RC10 B84/D stock setup?
Use a 78-tooth spur gear for the RC10 B84/D’s basic stock setup. That is the kit setup default; the car also supports 72-, 75-, and 81-tooth spurs for gearing changes.
Which rear gearbox height should I use on a Team Associated RC10 B84/D?
Start with 0 mm, the kit default. It’s the safer baseline if you’re not sure; the setting changes rear differential height. Move to +2 mm for carpet or astroturf. B84/D racers...
What oil setup for Team Associated RC10 B84/D on low-grip indoor clay?
Assuming you mean shock and differential oils, use the B84/D kit values as your baseline, then go lighter in small steps if the car lacks grip. There isn’t a documented B84/D oil...
What ride height should I use on carpet for Team Associated RC10 B84/D?
For the RC10 B84/D, start at 11 mm front and rear on medium-grip carpet. On high-grip carpet, 12 mm front and rear is a good starting point; those are the carpet ride heights used...
