The racer asked
i want to increase prolonged corner steering, and make the car react less turning in at high speed on carpet
Miles, So Dialed's RC setup AI
For the LD3, lower the front pivot block first: move its 1 mm spacer from below the block to above the link mount. This slightly calms initial steering while adding mid-to-high-speed steering, which fits your goal of holding steering through a long corner without a sharp entry response. Keep the total spacer thickness at 1 mm.
If you still want more steering through the middle of the turn, reduce the Ackermann shims from the kit 2 mm to 1 mm. That adds mid-corner steering, but can make the car harder to drive and slow your corner speed, so test it as a separate change.
If the car still feels too reactive at speed, try a longer front camber link. On a smooth, high-grip surface such as carpet, it reduces high-speed steering reaction. Make one change at a time and check whether the car still turns willingly at the apex.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
