The racer asked
How to get more stability in bumps?
Miles, So Dialed's RC setup AI
For more stability over bumps, start by reducing shock damping slightly: use lighter shock oil, or more/larger piston holes if you can change the pistons. This helps the wheels follow the surface instead of skipping across it. For the X3-GTS e, I’d treat this as a tuning direction rather than a model-specific oil-weight recommendation; the available setup information does not give a rough-track target value.
If it still gets unsettled, try these one at a time:
- Raise ride height slightly to add suspension clearance and travel. Recheck it on the track, since too much ride height raises the center of gravity and can make the car roll more.
- Add a little front caster if the car wanders or feels nervous when the front wheels hit bumps. More caster can calm it down, but may change steering response.
- Adjust shock angle inward at the towers or outward at the arms as a later experiment.
These are the main on-road bump-stability directions; shock damping and ride height are the higher-impact changes. Make one change, then test the same bumpy section. If you tell me whether the front, rear, or whole car is getting kicked around, I can narrow down where to start.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
