The racer asked
What's a good ride height for a rough track?
Miles, So Dialed's RC setup AI
For a rough track, try 25 mm front and 26 mm rear as a starting point on the MBX8 ECO. That slightly raises the front from the kit’s 24 mm setting; other MBX8 ECO setups also use 25 mm front on loose or loamy tracks.
More ride height helps the buggy stay composed over bumps and reduces chassis slap. The 26 mm rear is a general 1/8-scale 4WD buggy dirt/clay baseline, not a rough-track-specific MBX8 ECO setting.
Measure with the car ready to run on a flat surface. If it still bottoms out, raise the end that is striking the track a small amount and test again. Don’t go higher than needed: excess ride height raises the center of gravity and can make the car feel less stable in corners.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
