Setups
No setups found
No public setups have been shared for this car model yet.
Have a setup for the Fazer Mk2?
Share your setup sheet with the community — we'll fill in the details automatically.
Gearing
Stock gearing for the Kyosho Fazer Mk2, with common pinions and their ratios.
| Pinion | Spur ÷ pinion | FDR |
|---|---|---|
| 20T | 3.40 | 10.40 |
| 21T | 3.24 | 9.91 |
| 22T | 3.09 | 9.46 |
| 23T | 2.96 | 9.04 |
| 24T | 2.83 | 8.67 |
| 25T | 2.72 | 8.32 |
| 26T | 2.62 | 8.00 |
| 27T | 2.52 | 7.70 |
| 28T | 2.43 | 7.43 |
| 29T | 2.34 | 7.17 |
| 30T | 2.27 | 6.93 |
| 31T | 2.19 | 6.71 |
| 32T | 2.13 | 6.50 |
| 33T | 2.06 | 6.30 |
| 34T | 2.00 | 6.12 |
| 35T | 1.94 | 5.94 |
| 36T | 1.89 | 5.78 |
| 37T | 1.84 | 5.62 |
| 38T | 1.79 | 5.47 |
| 39T | 1.74 | 5.33 |
| 40T | 1.70 | 5.20 |
| 41T | 1.66 | 5.07 |
| 42T | 1.62 | 4.95 |
| 43T | 1.58 | 4.84 |
| 44T | 1.55 | 4.73 |
| 45T | 1.51 | 4.62 |
| 46T | 1.48 | 4.52 |
| 47T | 1.45 | 4.43 |
| 48T | 1.42 | 4.33 |
| 49T | 1.39 | 4.25 |
| 50T | 1.36 | 4.16 |
| 51T | 1.33 | 4.08 |
| 52T | 1.31 | 4.00 |
Shaded rows are the pinions most 1/10 4WD touring/gt setups run on the stock spur.
What pinion should I run?
Tell us your motor and track and get a starting pinion for the Kyosho Fazer Mk2, with the range racers in the class run.
Get a recommendation →Shop pinion gears at AMain →What pinion gear should I use on the Kyosho Fazer Mk2?
It depends on your motor and the track. In the 1/10 4WD touring/gt class, racers gear by final drive ratio: 6T and below near 7.34, 13.5T near 4.51, 17.5T near 4.51, 21.5T and up near 3.65. On the Fazer Mk2's stock 68T spur that is about 28T for 6T and below, 46T for 13.5T, 46T for 17.5T, 57T for 21.5T and up. Tight tracks gear down, open tracks gear up. For a starting pinion matched to your motor, use the So Dialed Pinion Recommender with the Fazer Mk2 selected.
What is the internal ratio (transmission ratio) of the Kyosho Fazer Mk2?
The Fazer Mk2 has an internal ratio of 3.059:1. Final drive ratio = spur ÷ pinion × 3.059. With the stock 68T spur, a 20T pinion gives an FDR of 10.40 and a 52T gives 4.00.
How many teeth is the stock spur gear on the Kyosho Fazer Mk2?
68 teeth. Changing the spur moves every pinion's ratio at once; most racers leave the spur and tune with the pinion.
Kit setup
Kit shock setup. Part numbers link to AMain.
- Front
- 100 cst
- Rear
- 100 cst
- Front
- Med
- Rear
- Med
- Front
- A - 3-hole
- Rear
- A - 3-hole
- Front
- 2,000 cst
- Rear
- 2,000 cst
What shock oil does the Kyosho Fazer Mk2 come with?
Out of the box the Fazer Mk2 runs 100 cst front, 100 cst rear, on A - 3-hole front, A - 3-hole rear pistons. That is the kit setup; you will need to adjust it for your track conditions. The RC Setup App can help dial it in.
What springs does the Kyosho Fazer Mk2 come with?
The kit springs are Med front, Med rear. Stiffer springs suit high grip and big jumps; softer springs add grip on slick or bumpy tracks.
What diff fluid does the Kyosho Fazer Mk2 come with?
The kit diff fluid is 2,000 cst front, 2,000 cst rear. Thicker front adds steering on power; thicker center sends more drive rearward; thicker rear stabilizes the car under throttle.
Setup Help
All Touring Cars →
Free to start · iOS & Android
Setup App & Race Log
Your Kyosho Fazer Mk2 is in the RC Setup App
Save every setup change you make to your Kyosho Fazer Mk2, get AI tuning answers for that exact car, and log your races — at the track or back in the pits.
- Setup Tracking
- AI Mechanic answers
- Find & Share Setups
- Race Log
- Gear Ratio Calculator
- Free to use
