The racer asked
What fdr should I be targeting?
Miles, So Dialed's RC setup AI
I need your motor’s turns or Kv to recommend an FDR target. The TLR 22-4 2.0 has a 2.3 internal ratio and an 84T stock spur, so its FDR is 2.3 × 84 ÷ pinion teeth.
What motor are you running?
Follow-up
17.5t I have 3 spur gear options 84t 76t and 70t I still need to select a pinion gear
Miles
Target about 8.0:1 FDR. The gearing recommendation is 24T pinion with 84T spur (8.05:1), 22T with 76T (7.95:1), or 20T with 70T (8.05:1). Confidence is high for these recommendations; the engine did not return a class-wide gearing range.
Those combinations give you nearly the same gearing, so choose based on which spur you want to run and which pinion fits your available gears. Check motor temperature after a short run; if it is too hot, drop one pinion tooth.
Follow-up
What’s the better one to use
Miles
Start with the 84T spur and 24T pinion for an 8.05:1 FDR. It is the TLR 22-4 2.0’s stock spur and a good baseline; the 76T/22T and 70T/20T combinations give nearly the same gearing, so neither should offer a meaningful speed advantage by itself.
Confidence is high for these gear pairings. A class-wide pinion range was not returned. Run a short pack and check motor temperature; if it gets too hot, go down one pinion tooth.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More 22-4 2.0 questions
What diff fluid for TLR 22-4 2.0 on hard-pack bumpy medium-grip?
For the TLR 22-4 2.0, start with 50,000 cSt in both front and rear diffs. If the car skips or feels unsettled over the bumps, try 40,000 cSt, changing one diff at a time, starting...
What fdr should I be targeting with a 17.5t motor for stock racing
Target 8.05:1 FDR as a starting point, using a 24T pinion with the TLR 22-4 2.0’s stock 84T spur. That’s a high-confidence recommendation for a 17.5T motor; the car’s stock spur...
