The racer asked
Gear diff oil in high bite carpet racing
Miles, So Dialed's RC setup AI
On high-bite surfaces, move gear diff fluid heavier if the car hooks up or spins the rear on corner exit, and lighter if it is loose or tight-rear on exit. Heavier fluid slows the diff so the rear drives more evenly. Lighter fluid lets the rear rotate more freely.
- Heavier gear diff fluid: calms exit wheelspin and adds forward bite when the car is on power and hooking.
- Lighter gear diff fluid: frees the rear when the car is loose on corner exit.
- Entry: heavier diff fluid is the fix when the rear is too loose on entry, and lighter fluid helps when the car pushes on entry.
The Enforcer 8 Direct Drive comes with a ball differential, not a gear differential, so these changes only apply if you run a gear diff. With a ball diff, the fluid weight still matters, but the response will be different. Also, carpet racing is outside what I have for this kit, so these are general direction changes rather than tuned numbers for carpet.
Try one change at a time, and start with the fluid weight you already run. What differential type and fluid weight are you using now, and does the car hook or spin the rear on exit?
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
