The racer asked
eos carpet set up sheet
Miles, So Dialed's RC setup AI
For a Team Associated RC10 B7 or B7D, start with this indoor carpet baseline. I don’t have a verified EOS event-specific sheet, so treat these as carpet starting settings, not an official EOS setup.
- Ride height: 12 mm front and rear. Carpet setups commonly fall around 11–14 mm; check that the chassis doesn’t bottom out.
- Camber: -1° front and rear as a starting point. Toe: 0° to 1° front toe-out, and about 1° rear toe-in on high grip.
- Front shocks: 35 wt is a reasonable starting pick within the 32.5–40 wt range used on high-grip carpet. Keep the kit 2.5 mm, 2x1.9 mm pistons to start.
- Shock positions: front tower mid and rear tower mid-out are common carpet positions.
- Tires: choose a carpet tread and compound that matches your track and its rules. Carpet racers’ B7 setups list options including Nessi, Fuzz Bite, Cactus, and Prism.
If it traction-rolls, lower the ride height or try a harder tire compound. If you tell me whether your EOS track is low, medium, or high grip, I can narrow the starting choices.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RC10 B7/B7D questions
What caster block insert positions are available for Team Associated RC10 B7/B7D?
The B7/B7D caster block inserts provide 0°, 2.5°, and 5° positions. The kit baseline is -2.5° in the setup data; you may see the insert positions logged as 0°, -2.5°, and -5°. For...
What ride height for RC10 B7/B7D on smooth high-grip clay?
For a B7/B7D on smooth, high-grip clay, start at 17 mm front and rear. Racers commonly run about 16–18 mm at both ends on high-grip clay. Measure with the car race-ready on its...
What is a typical ride height for a Team Associated RC10 B7/B7D on high-grip clay?
For a B7/B7D on high-grip clay, a typical starting point is 16–18 mm front and rear. Drivers’ setups cluster around 16–18 mm at both ends, so try 17 mm front and rear first.
What springs do people use on high-grip tracks for Team Associated RC10 B7/B7D?
It depends on the surface. For high-grip carpet, the most common front spring listed is the 4.3 lb Orange; racers also use 4.0 lb Red and some stiffer aftermarket options. For...
