The racer asked
What shock oil do most high grip surfaces run
Miles, So Dialed's RC setup AI
For the RC10 B6.3, a common high-grip carpet starting point is 45 wt front and 35 wt rear. Other high-grip carpet setups also use 35–40 wt front and 30–32.5 wt rear, so treat those as starting options, not a single fixed recipe.
The right oil depends on the surface: high-grip astroturf setups tend to use 32.5–40 wt front and 30–32.5 wt rear, while high-grip hard-packed setups are listed at 500 cSt front and 450 cSt rear.
Thinner oil lets the suspension move more freely; thicker oil slows its movement. Change one end at a time and test. Also, “wt” varies by brand, so match cSt when comparing oils from different manufacturers.
Miles
For a B6.3 on high-grip carpet, a solid starting point is 40 wt front and 32.5 wt rear. Racers’ high-grip carpet setups range from 35–45 wt in front and 30–35 wt in the rear; high-grip astroturf setups commonly use 30–32.5 wt rear oil.
Thicker oil slows suspension movement and can help the buggy feel more controlled on a smooth, high-bite surface. If it feels harsh over bumps or loses grip over rough patches, try one step thinner. If it rolls or lands too softly, try one step thicker. Check your front and rear pistons too, since hole size changes damping as well. If you mean high-grip hard-packed dirt rather than carpet or astroturf, the starting values can differ.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RC10 B6.3 questions
What shock oils for Team Associated RC10 B6.3?
For the RC10 B6.3 kit setup, start with 45 wt front and 35 wt rear shock oil, using Team Associated oil as the reference. Those are the model’s default oil weights. Thicker oil...
Team Associated RC10 B6.3 starter setup for racing at MB Models?
I can give you a B6.3 starter sheet, but I can’t confirm MB Models’ current surface or grip. This baseline assumes medium-grip, hard-packed dirt; if you’re racing carpet or...
What pinion gear for RC10 B6.3 with a 17.5T motor?
For your Team Associated RC10 B6.3 with a 17.5T motor, start with a 31T pinion and the stock 78T spur. That gives a 6.54:1 final drive ratio; confidence is high. After a short...
