The racer asked
What shock oils
Miles, So Dialed's RC setup AI
For the RC10 B6.3 kit setup, start with 45 wt front and 35 wt rear shock oil, using Team Associated oil as the reference. Those are the model’s default oil weights.
Thicker oil slows shock movement and adds damping; thinner oil lets the suspension react more freely. Racers vary from the defaults by surface: for example, reported front oils include 32.5–45 wt on carpet and 32.5–40 wt on astroturf, while rear oils include 30–35 wt on those surfaces.
Change one end at a time and test. If you’re using another brand, match the oil by cSt rather than the wt label, since wt isn’t standardized between brands. What surface do you race on?
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RC10 B6.3 questions
What shock oil should I run on a Team Associated RC10 B6.3 for high-grip carpet?
For the RC10 B6.3, a common high-grip carpet starting point is 45 wt front and 35 wt rear. Other high-grip carpet setups also use 35–40 wt front and 30–32.5 wt rear, so treat...
Team Associated RC10 B6.3 starter setup for racing at MB Models?
I can give you a B6.3 starter sheet, but I can’t confirm MB Models’ current surface or grip. This baseline assumes medium-grip, hard-packed dirt; if you’re racing carpet or...
What pinion gear for RC10 B6.3 with a 17.5T motor?
For your Team Associated RC10 B6.3 with a 17.5T motor, start with a 31T pinion and the stock 78T spur. That gives a 6.54:1 final drive ratio; confidence is high. After a short...
